Hi All, Alan And Peter, I know that it is not model engineering as such, do you know of anyone that can do this Fm modification on my new rig. Kenny Skye. http://www.n9efj.net/ts530.html ----- Original Message ----- From: "kenny macdougall" <kenny.macdougall@xxxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Sunday, April 01, 2012 7:19 PM Subject: Re: [modeleng] Re: TRIO TS530S HF Transceiver > Thanks Alan, > I will be doing a bit of studing fo my liccence, Yes i will be going for > it. > Kenny > > ----- Original Message ----- > From: "stepney" <alan@xxxxxxxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Sunday, April 01, 2012 6:34 PM > Subject: [modeleng] Re: TRIO TS530S HF Transceiver > > >> Hi Kenny, >> I had a 9r59DS which is the basic and receive-only version of the 530. >> That was the only Trio/Kenwood have owned. >> Never had any trouble with it, and it worked well. >> >> All I know about the TS530 is that they are reliable, and work OK. >> About the only possible trouble is the PA's, the 6146 does tend to give >> problems (and there are several versions of it) if itisnt neutralised >> properly. >> (I keep my Yaesu down to 75 or 80 watts to give the longest possible >> life to the PA's, considering how expensive they are!) >> >> Regards >> Alan >> >> PS, Have you got, or are going to get, your liccence? >> >> >> On 01/04/2012 13:58, kenny macdougall wrote: >>> Hi Alan, >>> I Was talking to you a bit a go about CB radio, and you said to me what >>> about me going into the Ham Rigs, well i gave it some thought and got >>> myself >>> a Kenwood TRIO TS530S HF Transceiver, could you please give me your >>> thoughts on this rig, i have not used it yet. >>> Regards >>> Kenny >>> >>> MODEL ENGINEERING DISCUSSION LIST. >>> >>> To UNSUBSCRIBE from this list, send a blank email to, >>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the >>> subject line. >>> >> >> MODEL ENGINEERING DISCUSSION LIST. >> >> To UNSUBSCRIBE from this list, send a blank email to, >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >> line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.