[modeleng] Re: Re 3" Burrell
- From: Allen Messer <al_messer@xxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Sun, 1 May 2005 18:25:53 -0700 (PDT)
TEL, the idea is to block the ports with something
that will resist the abrasive and yet be washed out of
the ports with water.
Al
--- Terry Lane <tel@xxxxxxxxxxx> wrote:
> Don't use toothpaste Al, it's an abrasive in it's
> own right. Makes a very
> good compound for cutting back varnish
>
>
> > Andy, I think I would have more faith in
> Toothpaste or
> > Glaziers' Putty in keeping the abrasive dust in
> check
> > than in Cotton Wool.
> >
> > Al Messer
> >
> >
> > --- AndyA <AndyA@xxxxxxxx> wrote:
> > > Hi All
> > > thank for your offers of help/ suggestions. I've
> > > just come in from the workshop and as suggested
> the
> > > problem with the lubricator is a worn shaft.
> Despite
> > > being a 'commercial item' the shaft doesn't
> appear
> > > to have been hardened at all.
> > > I might take you up on your offer of photos
> Roger,
> > > but I'm going to Harrogate on Friday so I will
> have
> > > a look there first.
> > > I will try your idea of cleaning the regulator
> face
> > > tomorrow Ron. It seems to be a simplest way of
> doing
> > > it. Cotton wool has been suggested for blocking
> the
> > > ports to prevent the carborundum, dust getting
> into
> > > the cylinder so I will try that as well. I'll
> let
> > > you know how it goes.
> > > regards
> > > Andy
> > >
> > > MODEL ENGINEERING DISCUSSION LIST.
> > >
> > > To UNSUBSCRIBE from this list, send a blank
> email
> > > to,
> > > modeleng-request@xxxxxxxxxxxxx with the word
> > > "unsubscribe" in the subject line.
> > >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email
> to,
> > modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject
> line.
> >
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email
> to,
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
