[modeleng] Re: Mystery thread
- From: "Jesse Livingston" <fernj1@xxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Thu, 22 Nov 2007 09:39:39 -0600
My next task will be to fabricate the step pulleys and this brings me to a
question for the group, which is, . . . in order to slack the V-belt for
speed changes I plan to use an idler pulley and in thinking about that it
occurred to me that the idler must be on the "slack" side of the driving
pulley as opposed to the "pulling" side. Am I correct in this, or does it
matter in the long run?
Regards,
Harry
Definitely on the slack side Harry.
Jesse in cool damp Troy, TN USA
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
