I can't find the picture but another mate has suggested either NZ or even Cuban. Ok, I give up and even if I found the picture, the scanner has thrown a shoe!!!!! Could still be a varient of your Z19s Tel, have another couple of tubes and look at the pic again, might look closer!!! Dave. ----- Original Message ----- From: "TEL" <tel47@xxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Wednesday, July 01, 2009 9:43 PM Subject: [modeleng] Re: Loco identity > Since you insist Davy - fust thing I thought of was that it was vaguely > reminiscent of the Z19's, except they had inclined cylinders and running > boards > Dave Beaman wrote: >> Ok, guys, I've waited for a while to see what you can comr up with. Also, >> it >> has given me time to try and find a picture of a "similar" loco. The >> other >> thing I was awaiting was a post from my black pudding, over chilled beer >> swilling mate from down under, where are you Tel? >> >> I have a pic somewhere of an aussie loco of a similar design but with a >> proper tender. Was deff an Oz loco as my mate was on hols there. >> >> Over to you Tel, in the meantime, I'll try and find the pic..... out of >> thousands!! >> >> Dave. >> >> >> ----- Original Message ----- >> From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx> >> To: <modeleng@xxxxxxxxxxxxx> >> Sent: Wednesday, July 01, 2009 6:44 PM >> Subject: [modeleng] Re: Loco identity >> >> >> >>> >>> >>>> Someone has sent me this photo of a locomotive, and asked if I can >>>> identify >>>> the design. >>>> >>> Alan, >>> >>> It's foreign!! >>> >>> Barrie >>> >>> MODEL ENGINEERING DISCUSSION LIST. >>> >>> To UNSUBSCRIBE from this list, send a blank email to, >>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the >>> subject >>> line. >>> >> >> MODEL ENGINEERING DISCUSSION LIST. >> >> To UNSUBSCRIBE from this list, send a blank email to, >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >> line. >> ------------------------------------------------------------------------ >> >> >> Internal Virus Database is out of date. >> Checked by AVG - www.avg.com >> Version: 8.0.233 / Virus Database: 270.10.16/1926 - Release Date: >> 01/30/09 17:31:00 >> >> > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.