[modeleng] Re: Lapping Steel Cylinder
- From: "Lee Grant" <leegrant@xxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Sat, 21 Aug 2004 09:07:37 +1000
Al
Chinese made small engine & brake cyl hone's are sold here for about $14.00
AUD $10.00 US I would send you one but the postal rates would be 3 times
that.
Lee Grant
PS. For people in OZ they are available at Super Cheap Auto.
----- Original Message -----
From: "Allen Messer" <al_messer@xxxxxxxxx>
To: "modeleng" <modeleng@xxxxxxxxxxxxx>
Sent: Saturday, August 21, 2004 1:15 AM
Subject: [modeleng] Lapping Steel Cylinder
> I have a cylinder fabricated from Black Steel
> Pipe/Tubing that must be lapped. It is app. 1.625"
> in diameter by 4 inches long. A commercial cylinder
> hone would not fit in the bore. Making a lap from a
> piece of Copper this size is cost prohibitive. I have
> several blocks of very dense hard Maple on hand. Is
> it possible to do a well fitting job with a wooden
> lap?
>
> Al Messer
>
>
>
>
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
> http://promotions.yahoo.com/new_mail
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
