[modeleng] Re: Diamond Core Drills
- From: "Shep" <shep.28@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 9 Apr 2008 10:43:55 +0100
How ARE you, Jesse - we have not heard from you for a long time!
Cheers! Hubert
----- Original Message -----
From: "Jesse Livingston" <fernj1@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, April 09, 2008 3:40 AM
Subject: [modeleng] Re: Diamond Core Drills
> Clif,
>
> Maybe once you had got down to the washer, there was no load on the bolt
> which is why it turned so freely since the bolt was not bottomed out in
> the
> hole.
>
> Jesse in warm dry (for a change) Tennessee
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
