[modeleng] Re: Boiler descaling
- From: NIGELBALL@xxxxxxx
- To: modeleng@xxxxxxxxxxxxx
- Date: Fri, 8 Dec 2006 17:39:06 EST
Hi
IPA, Isopropyl alcohol, is a wetting agent.
Regards
Nigel
In a message dated 08/12/2006 22:20:46 GMT Standard Time,
andrew@xxxxxxxxxxxxxxxxx writes:
Nigel
You put a drop of IPA it ? Doesn't the gas in the beer ruin the joint ?
Andy
-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of NIGELBALL@xxxxxxx
Sent: 08 December 2006 18:22
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: Boiler descaling
Hi All
Phosphoric Acid is also used in the flux used for etch brass soldering
construction kits, I used to make my own, 10% solution in water with a drop
of
IPA, (This fluxes the flux) and allows it to follow.
I also believe it is used in rust inhibitors?.
Regards
Nigel
Leicester
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
