[modeleng] Re: Boiler Capacities
- From: "John Pagett" <john_pagett@xxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 10 Oct 2005 20:00:38 +0100
Cliff,
I assume this is full capacity, rather than normal water level?
At least a sweet pea should be relatively easy! It's all volumes of
cylinders.
JohnP
----- Original Message -----
From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, October 10, 2005 7:44 PM
Subject: [modeleng] Boiler Capacities
Hi All,
Under the new Boiler Regulations, Boilers are segregated into groups under a
Litres capacity X Bars calculation.
The Boiler Inspector at my club is trying to make up a register of
capacities of all common and uncommon Boilers in Litres, model name and
boiler dimensions for future reference.
To this end I said that I would try and help out by posting this notice. So
if any of you know the exact capacities of your boilers I would be grateful
for the info.
Regards
Clif
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/127 - Release Date: 10/10/2005
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
