Re: [MoAccess] MoTools scripts
- From: "Vince Mistretta" <vmistretta1411@xxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Fri, 14 May 2010 20:20:29 -0400
I know it doesn't matter about the connection. Yes, at first when I loaded
nothing happened in the Drum Kit. I minimized the application then went
right back in by maximizing and all navigation was there.
Vince Mistretta
Cellular - 561-234-7631
Skype - vin5451 (email me to request Skype conversation)
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Arturas Lenksas
Sent: Friday, May 14, 2010 2:45 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] MoTools scripts
It doesn't matter is board connected or not. Load drum editor and then Tab
thre or more times. If buttons are anounced, then every thing is all right.
When board is not connected, there is no values loaded from board. use
cursor keys to hear adjustable parameter changes.
Arturas
----- Original Message -----
From: "Vince Mistretta" <vmistretta1411@xxxxxxxxx>
To: <MoAccess@xxxxxxxxxxxxx>
Sent: Thursday, May 13, 2010 11:36 PM
Subject: Re: [MoAccess] MoTools scripts
> Arturas,
>
> FYI,
>
> I just loaded the scripts in demo mode at home using Jaws 8.0 watever the
> last build was and they seem to work better than with the video display
> capture driver in version 10 I have at the office. All menus are coming
> up
> and I find no fields not being spoken properly at least in the voice
> editor
> and total librarian as a test. Mind you it is not hooked up to a Motif
> yet
> since I have not purchased one yet, but things are being found here. The
> registration screen also comes up fine.
>
> The only thing I can say is the video display capture drivers go nuts
> after
> version 9.
>
> I'll be able to put it too an actual test once I get the board.
>
>
> Vince Mistretta
> Cellular - 561-234-7631
> Skype - vin5451 (email me to request Skype conversation)
> -----Original Message-----
> From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
> On Behalf Of Arturas Lenksas
> Sent: Tuesday, May 04, 2010 6:07 AM
> To: MoAccess@xxxxxxxxxxxxx
> Subject: [MoAccess] MoTools scripts
>
> Hi, Listers.
>
> Endless Jaws scripts for MoTools XS and MoTools ES packages by John Melas
> are to Your trial! Scripts are attached. Please read MoTools.TXT file
> carefully. Who want to use earlyer Jaws than 10, must install Jaws 10
> latest
> or higher version anyway, because new video intersept. I tested with Jaws
> 8
> on clean install and no go without Jaws 10 or later installed!!! NO MSAA
> information presented to scripts. No need to recompile to Jaws 8. If any
> need to check more early Jaws, let Me know.
> All feedback is welcome!
>
> Arturas
>
>
> For links to all Motif info for blind owners, visit www.MoAccess.info.
> To change your list options and view archives for the MoAccess list, visit
> www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
Other related posts:
