Re: [MoAccess] How to change the clocking settings in motif xs8
- From: "oscar" <oscar@xxxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Thu, 17 Apr 2008 12:16:20 -0700
Yes all the changes that I am making are on the FW1884 control panel. Here
is how its set up.
Control Protocol, set to FW 1884 Native
Clocking Sample rate, set to 44.1KHZ
Clock source is set to Digital in ADAT,
What I just discovered is that If I set the
Clock source to SPDIF the clicking and popping gos away but then I cant use
my interface that I have plugged in to the ADAT port. Looks like I cant
have it both ways unless you all know of something I am missing here.
thanks
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Bryan Smart
Sent: Thursday, April 17, 2008 12:00 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
When you talk about how your DAW is set, I hope that you aren't talking
about your recording host software like Sonar. Your recording settings in
Sonar, regarding sample rate/bit depth, have absolutely nothing to do with
the configuration of your audio interface. Any changes that you're making
regarding the connection of the Motif should be going on in the
FW1884 control panel.
Also, there is no need to concern yourself with clock transmition.
Unlike other digital audio formats, S/PDIF transmits at a fixed clock.
There is no need or ability to transmit a clock signal for an S/PDIF
connection.
I've used the Motif XS's s/PDIF connection very rarely. I used it with my
MOTU Ultra lite and my Presonus Firebox. It worked fine in both cases. I'm
sure that it can work with the FW1884, given the right FW1884 settings.
Those other interfaces are very cheap when compared to the FW1884.
Of course, mLAN is quite superior as a digital connection, but XP doesn't
have sufficient audio resources to run mLAN with another audio interface at
the same time. Based on what I've read, I think that Vista will allow mLAN
and another audio interface to run at the same time, but I haven't had
enough courage yet to try Vista on my DAW.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of oscar
Sent: Thursday, April 17, 2008 1:56 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
Ok good because that's what I have my DAW set to.
So now I know that its not the clock settings so I am back at step 1.
Any other ideas anyone? Poor me jajaja.
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Benjamin Blatter
Sent: Thursday, April 17, 2008 12:24 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
I've got the Tascam US-144. Maybe you should set sample clock source on
"internal", not automatic. In my case, I can't switch between 44.1 khz and
higher, if the clock source on tascam is set on automatic.
How ever, the owner's manual says that the digital out of the XS is on
44.1 khz , 24 bits. I don't think, you can change that for the XS.
Benjamin
----- Original Message -----
From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
To: <MoAccess@xxxxxxxxxxxxx>
Sent: Thursday, April 17, 2008 7:12 AM
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
No, it means that the digital connection on the Tascam will probably need to
be set for 48kHz. I don't know if that means that the entire Tascam system
must be at 44kHz or not.
I'm not even 100% certain that the s/pdif out on the Motif XS runs at 48.
You might try using the Tascame at 48 to see if that makes a difference.
I wouldn't run your DAW at 48kHz. That is an odd-ball rate. Most people run
at 44 or 96. If you run at 48, it will make it difficult to exchange
projects with others.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of oscar
Sent: Thursday, April 17, 2008 12:43 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
Thanks Bryan,
So that means that if I want to use the Motif through the SPDIF I have to
set everything to record at 48KHZ?
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Bryan Smart
Sent: Wednesday, April 16, 2008 6:08 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
It should be 48kHz.
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of oscar
Sent: Wednesday, April 16, 2008 8:25 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
Its set to FW 1884 native 44.1 KHZ
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Bryan Smart
Sent: Wednesday, April 16, 2008 5:21 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
Well, the clock setting on the Tascam is probably wrong.
You should investigate on the Tascam, though, as there isn't anything that
you can change on the Motif.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of oscar
Sent: Wednesday, April 16, 2008 8:14 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
It was a guess that that is what is causing my problem. I have the Motif
plugged in to the in of the Tscam FW 1884 and when I hold a note I get
clicks sometimes on the write then the left channel. I have no idea what to
try to solve this.
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Bryan Smart
Sent: Wednesday, April 16, 2008 4:01 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] How to change the clocking settings in motif xs8
Why do you need to do that? SPDIF on the XS works at a fixed sampling rate
of 48kHz, and I think, 24-bit resolution. Anyhow, you can't change it.
Bryan
-----Original Message-----
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of oscar
Sent: Wednesday, April 16, 2008 12:43 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] How to change the clocking settings in motif xs8
Hi guise It looks like I need to edit the clock settings on my xs so it will
work correctly through SPDIF but I don't know how. Can anyone give me the
steps on how to get this done.?
thanks
Oscar Corella
Phone: 520-241-2445
Fax: 520-748-1151
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
Other related posts:
