At this point, you can feed the output from the crystal filter to your bench receiver at 20 MHz and tun around. - f On Sun, Jan 19, 2014 at 1:53 PM, Ashhar Farhan <farhanbox@xxxxxxxxx> wrote: > mark, > the local oscillator has to be at 27 mhz. on the higher side. this will > reduce the local oscillator leakage to the RF port (you can see that the > oscillator suppression isn't any great shakes. It is about -40dbm. That > will be only 20 db below the tx signal level unless the LPF kicks in. > - f > > > > On Sun, Jan 19, 2014 at 1:02 PM, Mark G0MGX <mark.g0mgx@xxxxxxxxx> wrote: > >> Hi Team >> >> Some more musings of mine on the mixer output, crystal matching and >> selection plus a sweep of my crystal filter... >> >> http://g0mgx.blogspot.co.uk/2014/01/yet-more-minima.html >> >> Mark >> G0MGX >> >> >