[minima] Re: Minima PCB

  • From: Ashhar Farhan <farhanbox@xxxxxxxxx>
  • To: "minima@xxxxxxxxxxxxx" <minima@xxxxxxxxxxxxx>
  • Date: Mon, 1 Feb 2016 00:21:08 +0530

yeah, i think that HF1 is more of a development of the bitx into a double
conversion receiver. infact, i can see that it will be quite easy to modify
a bitx to general coverage with the HF1 front-end. so, let's agree to move
that to the bitx group.

- f

On Mon, Feb 1, 2016 at 12:14 AM, Arv Evans <arvid.evans@xxxxxxxxx> wrote:

Farhan

I like the idea of keeping all the Farhan Transceiver Designs on one
single
discussion group.  That makes it a common meeting place for those who
are building and modifying these rigs.  Having new designs available in
parallel with the older ones may add a small level of confusion but that
can
be managed if members make it clear what rig they are talking about when
they make posts to the group.  It also supports sharing ideas for
improving
the older designs if someone wants to incorporate HF-1 ideas into their
BITX
build.  We already have this multiple rig situation with the various BITX
versions being discussed on that forum and seem to be handling it fairly
well.

If this works, are you going to make the HF-1 announcement on the BITX
group as well as here on the Minima freelist forum?

Arv
_._

On Sun, Jan 31, 2016 at 11:15 AM, Ashhar Farhan <farhanbox@xxxxxxxxx>
wrote:

arv,
i am keeping those options open for the Si5351 advocates. one could even
use the third output for the bfo. for me, i will stick to the Si570. not
only can i solder Si570 easily, i am also so used to the low phase noise of
Si570 now, that i can't possibly go back to anything noiser.

i am not sure if we can manage another group. but if the HF1 is close to
the bitx design, can we look at discussing this the bitx group itself?
what's are your thoughts?

- f

On Sun, Jan 31, 2016 at 11:37 PM, Arv Evans <arvid.evans@xxxxxxxxx>
wrote:

Farhan

From a first glance at the schematic it seems that you have addressed
spurious emission problems that plagued the Minima layout.  The new
mixers are quite interesting as well.

Are there any plans to replace the Si370 and 3X-18MHz oscillator with
a single Si5351A synthesizer?  It might even be possible to use the 3rd
output from an Si5351a for sidetone and tune-up signal generation?

http://www.qrp-labs.com/synth.html

http://www.qrp-labs.com/images/synth/synth_assembly.pdf

http://goo.gl/9mKi36

http://goo.gl/uPyA00

Will you be starting a new discussion group specifically for the HF-1?

I will be watching for the project documentation on your web site.

Thanks,

Arv K7HKL
_._




On Sun, Jan 31, 2016 at 9:34 AM, Ashhar Farhan <farhanbox@xxxxxxxxx>
wrote:

ok, here is what you all can do.

go ahead and make whatever you can out of the body of work of minima
with the following caveat:

1. to keep minima distinct, i wouldn't like these boards or version to
be callled the Minima or Minima version x, y z. Choose a different name.
2. if you design is substantially derived from Minima, then it should
be available without any restrictive copyright.
3. the software is under GPL, thus any derived version must be
available under the GPL too.

on the other hand, i have completed a much easier  to build (though
slightly more part count than the BITX) all band transceiver called the
HF1. It uses diode mixers and the same audio back-end as the Minima. The
HF1 is a double conversion transceiver with the first IF of 45 MHz and the
second IF of 10 MHz. The first oscillator is the Si570 and the second
oscillator is 18.432 MHz crystal in third overtone. I have been operating
it extensively for the last few months. It is a fantastic performer which
is very easy to setup and build. I am enclosing a circuit of it here for
you guys to go through.

I will complete the write-up and post it soon on my website. this grew
out of my frustration with the Minima's KISS mixer's oscillator leakage.

- f

- f

On Sun, Jan 31, 2016 at 9:34 PM, Juan Carlos Berberena Glez <
jcberberena@xxxxxxxxx> wrote:

I am interesting in getting  more than one set to send to Cuba.
I am in U.S. now.
If someone can send me the GERBER I can do manufacture in China and in
the same way and help others.
Please feel free to contact me anytime.
WJ6C / Jc

2016-01-31 10:56 GMT-05:00 Vape Sailor <pedrocalixto80@xxxxxxxxx>:

Count me in if the cost to azores portugal is not to mutch.

Pedro Almeida
     CT5JZX

 NRA: PN063
http://ct5jzx.nra.pt/
http://www.qrz.com/db/CT5JZX
Em 31/01/2016 15:51, "Ray" <crf2@xxxxxxxxxxxxxx> escreveu:

Count me in for 1 set .
Ray kc4dym




Sent from my ASUS Pad

Baruch Zilbershatz <4z4rb11@xxxxxxxxx> wrote:

count me in too for 1 set
thanks
baruch 4z4rb

On Sun, Jan 31, 2016 at 4:33 PM, Riccardo Montaguti <
ricky451@xxxxxxxxxx> wrote:

Good morning,

I could be interested too!
How much would it cost to ship to Italy?
On which version of the minima is based the PCB?

73 Riccardo

Inviato da iPhone

Il giorno 31/gen/2016, alle ore 12:52, Ruud <pe1hlv@xxxxxxxxx>
ha scritto:

I am interested in one of your boards. I live in the Netherlands.
How much are the total costs for the board and post ???

Kind regards
Ruud
pe1hlv

Op 31 jan. 2016 om 00:55 heeft Andrew Ricketts <andrewr@xxxxxxxx>
het volgende geschreven:

Hi Ashhar et al.

I had 10 PCB's made see http://www.magma.ca/~andrewr/

I made these for my own use. Two other friends I gave boards and
are building.
I have my receiver working in RX. Thank you for a great design.
I have 5 blank boards left. I would like to send you and anyone
else that wants one for the cost of postage.
The boards are not perfect there are a few cuts and jumpers
required. (see construction doc a work in progress). If we have more
builders can get
any remaining issues fixed. My BOM uses Digikey part numbers but
can get manfacturers numbuers from that.
Is Surface mount but can be easily hand assembled.
There is a construction manual on my web site that can be
downloaded.
I also have a board designed for digital card I also have 5 of
these left.

If the design is viable I can clean up the minor errors and have
another batch of boards made available at cost.
I had the boards made in China at reasonable cost.

Let me know what you think.

Andrew.



--
This message is virus free, protected by Primus - Canada's
largest alternative telecommunications provider.

http://www.primus.ca

On Sat 30/01/16  1:11 PM , Ashhar Farhan farhanbox@xxxxxxxxx
sent:
guys, here is the pinch, the mixer leakage is too much to meet
the
spectral requirements of FCC. if we can get the local
oscillator down
to -50dbc then we have a game. - f
On Sat, Jan 30, 2016 at 11:17 PM, Vape Sailor  wrote:
Still whaiting too.
Whe could make a group buy for boards (if avaiable) and parts
like a
kit.

Pedro Almeida
    CT5JZX

NRA: PN063
http://ct5jzx.nra.pt/ [2]
http://www.qrz.com/db/CT5JZX [3] Em 30/01/2016 17:34, "Baruch
Zilbershatz"  escreveu:
i am waiting toolike to play....
On Sat, Jan 30, 2016 at 6:19 PM, takis perreas  [5]> wrote:
Hi ganque!Same here like Paul. I am waiting for a PCB to
surface.I
had even sent Sandeep a contribution to purchase a batch of 3
by 3
PCBoards of the earlier version but never received the Main
Board. I
can homebrew Minima, Manhattan style, but I do like the
neatness of
a PCB.Well, any news?!Takissv3auw/m0lpt
-------------------------
Date: Sat, 30 Jan 2016 08:42:16 -0500
Subject: [minima] Re: Minima PCB
From: paul.chebi@xxxxxxx [6]
To: minima@xxxxxxxxxxxxx [7]
Andrew: what's the latest on the Minima's PCB board. How Can
I get one along with BOM of parts ?
Thanks

Paul kk4ptv On Jul 15, 2015 9:27 AM, andrew  wrote:
This is a new pcb that has just been created by VE3ZMH so a
couple
of guys here in Canada who are interested in the minima can try
it
out. Is surface mount.
Andrew
On 15-07-15 02:57 AM, gurudatta panda wrote:
Hi All,
I was away for a while and unaware about the latest development.
Can somebody put some light on which design the PCB is being
talked
about? Is the design and testing is completed for minima now?
VU3GDP
On Mon, Jul 13, 2015 at 11:29 PM, andrew  wrote:
A couple of the local Hams got together here and decided to
have a
go at this radio. So we are sharing the costs and the
experience. Got
to check out the board to make sure I have not made any big
mistakes.
I am also working on the digital board to go with this. I am
also
writing a construction manual and it has the parts list as all
Digikey parts. Is a mix of surface mount and through hole but
the
surface mount are all larger parts so can be hand assembled.
Surface mount parts very inexpensive.
(1206 size typ) Going to be posting progress on the web page,
suggest you wait till we fire up the first boards and get the
bugs
out.
If it all works and there is interest will likely make boards
available at nominal cost to other Hams.
Keep checking the web page.
Andrew
On 15-07-13 12:57 PM, Paul Chebi wrote:
I would be interested in buying one of these boards if when
available as well as receiving any progress reports on the
building
of the Minima. BOM, etc.
Thanks for sharing
Paul Chebi
Sent from my iPhone
On Jul 13, 2015, at 11:57 AM, andrew  wrote:
This is my first post. I have created my own PCB for the
minima. It
mostly uses surface mount. Going to start assembling it this
week.
Will document progress on web page magma.ca/~andrewr [11].
VE3ZMH
--
THANKS & REGARDS
GURUDATTA PANDA JR. SITE ENGINEER R.V.N.L. / KDJR
MOB : +91 9777447844 [12] (WORK)          +91 9778238593 [13]
(HOME)
--
    4Z4 RB
Baruch Zilbershatz
Ha-Shibolim 18
Nitzanay-Oz 42836
Israel


Links:
------
[1]

http://webmail.primus.ca/javascript:top.opencompose(\'pedrocalixto80@gmail
.
com\',\'\',\'\',\'\')[2] http://ct5jzx.nra.pt/
[3] http://www.qrz.com/db/CT5JZX
[4]

http://webmail.primus.ca/javascript:top.opencompose(\'4z4rb11@xxxxxxxxx\
',\
'\',\'\',\'\')[5]

http://webmail.primus.ca/javascript:top.opencompose(\'sv3auw@xxxxxxxxxxxxx\
',\'\',\'\',\'\')[6]

http://webmail.primus.ca/javascript:top.opencompose(\'paul.chebi@xxxxxxx\
',
\'\',\'\',\'\')[7]

http://webmail.primus.ca/javascript:top.opencompose(\'minima@xxxxxxxxxxxxx\
',\'\',\'\',\'\')[8]

http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
',\'
\',\'\',\'\')[9]

http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
',\'
\',\'\',\'\')[10]

http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\
',\'
\',\'\',\'\')[11] http://magma.ca/~andrewr
[12] http://webmail.primus.ca/TEL:%2B91%209777447844
[13] http://webmail.primus.ca/TEL:%2B91%209778238593





--
     4Z4 RB
Baruch Zilbershatz
 Ha-Shibolim 18
Nitzanay-Oz 42836
Israel






--
*“If you have a penny and I have a penny and we exchange pennies, you
still have one cent and I still have one cent.  But if you have an idea 
and
I have an idea and we exchange ideas, you now have two ideas and I now 
have
two ideas.”*

Lic.Juan Carlos Berberena Gonzalez
WJ6C exCO6BG

www.frcuba.com
www.berberena.com
http://espanol.groups.yahoo.com/group/cacharreando/
https://www.youtube.com/user/juancarlosberberena








Other related posts: