[marc] Re: (No Date: Thu, 23 Jun 2022 15:06:10 -0400

  • From: "Steve Dresser" <dmarc-noreply@xxxxxxxxxxxxx> ("s.dresser")
  • To: <marc@xxxxxxxxxxxxx>

Unfortunately I won’t be able to join the rag chew tonight because I’ll be 
attending several Zoom meetings.

 

From: marc-bounce@xxxxxxxxxxxxx <marc-bounce@xxxxxxxxxxxxx> On Behalf Of Bob 
Druk ("bobdruk")
Sent: June 23, 2022 14:47
To: marc@xxxxxxxxxxxxx
Subject: [marc] 

 

Just to let everyone know that the repeater is still up and running. 

147.360 PLL 67hz

 

However the output power is very low at this time so you might have a problem 
hearing it.

The repeater in all likely hood  will hear you since the receiver is working 
fine.

 

 

We are going to have a Thursday night rag chew session tonight starting at 7:00 
PM.

It would be good if as many as possible would try to check in -this way we 
would have some idea as to the repeater's useful range in its current condition.

 

All indications point to a possible lightening strike which may have damaged 
both the antenna and duplexers. 

We do know that the repeater,itself (ICom F3000) was unharmed and is putting 
out close to 50 watts from its transmitter.

 

At present there are no immediate plans to do any repairs to the repeater 
-replacing the duplexers and antenna could run  any where from $3,000 - $4,000

Depending on whether a good set of used duplexers were available  around $1,600 
or if we we had to buy new they could be twice that amount around $3,200

 

We know that the antenna labor would be around $900.00 from our original 
installation.

What we have not researched is the cost of a better commercial grade repeater 
antenna which I have heard start in in the neighborhood of $700.00

 

So that is where things kind of stand at the present time.

If anyone has any suggestions or ideas we would be happy to hear them.

 

Hope to hear from some of you tonight.

 

73,

Bob

WA1UIY

Trustee Newton Repeater

  • References:

Other related posts:

  • » [marc] Re: (No Date: Thu, 23 Jun 2022 15:06:10 -0400 - Steve Dresser