[Lugge] Re: rtl8139

  • From: Fulvio Pizzigoni <fulviopizzigoni@xxxxxxxxx>
  • To: lugge@xxxxxxxxxxxxx
  • Date: Tue, 1 Jun 2004 18:08:08 +0200

Ciao a tutti.

Questa benedetta RTL8139 non vuole proprio saperne di andare, o meglio, IO NON 
so proprio come farla andare.
Dunque ricapitoliamo.
Dopo aver caricato il modulo, configurato l'indirizzo IP e il gw


[root@localhost pizzi]# ifconfig eth0 10.0.0.30 up
[root@localhost pizzi]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:50:BA:AB:E6:8E
          inet addr:10.0.0.30  Bcast:10.255.255.255  Mask:255.0.0.0
          inet6 addr: fe80::250:baff:feab:e68e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:9 dropped:0 overruns:0 carrier:18
          collisions:153 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:1050 (1.0 Kb)
          Interrupt:11 Base address:0xd400

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:159 errors:0 dropped:0 overruns:0 frame:0
          TX packets:159 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:15505 (15.1 Kb)  TX bytes:15505 (15.1 Kb)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

[root@localhost pizzi]# route add default gw 10.0.0.2

Non riesco a collegarmi con nessun indirizzo della rete locale, nè con il 
router, nè con alcuna altra macchina.

[root@localhost pizzi]# ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
From 10.0.0.30 icmp_seq=1 Destination Host Unreachable
From 10.0.0.30 icmp_seq=2 Destination Host Unreachable
From 10.0.0.30 icmp_seq=3 Destination Host Unreachable
From 10.0.0.30 icmp_seq=4 Destination Host Unreachable
From 10.0.0.30 icmp_seq=5 Destination Host Unreachable
From 10.0.0.30 icmp_seq=6 Destination Host Unreachable
From 10.0.0.30 icmp_seq=7 Destination Host Unreachable
From 10.0.0.30 icmp_seq=8 Destination Host Unreachable
From 10.0.0.30 icmp_seq=9 Destination Host Unreachable

--- 10.0.0.2 ping statistics ---
11 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9998ms
, pipe 4

Che fare?

Un saluto (un po' sconsolato).
Fulvio
========----------

 Prima di scrivere in m-list per favore leggi il regolamento
 http://www.lugge.net/soci/index.php?link=manifesto

 Archivio delle e-mail postate in lista
 http://www.freelists.org/archives/lugge/

 Modifica dell'account sulla lista LUGGe
 http://www.lugge.net/soci/index.php?link=manifesto.htm#list


Other related posts: