[Lugge] problemi con lilo
- From: Arnaudo Massimo <home@xxxxxxxxxxxxxxxxxxxx>
- To: Lug Genova <lugge@xxxxxxxxxxxx>
- Date: Sat, 6 Mar 2004 15:41:22 +0100
Ciao,
ho il problema che non riesco ad aggiornare il mio floppy di boot.
Premetto che la versione di lilo è la 22.5.8, il floppy è nella
condizione 'write enable'.
Dunque, il mio file lilo.conf risulta essere:
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt', or install a new kernel. The |
# | computer will most likely fail to boot if a kernel-image |
# | post-install script or you don't remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+
# Support LBA for large hard disks.
#
lba32
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/fd0
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/hdb1
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
prompt
timeout=150
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
vga=0x317
# Boot up Linux by default.
#
default=Linux
image = /vmlinuz
label = Linux
read-only
initrd = /initrd.img
image = /boot/vmlinuz
label = Mandrake9
root = /dev/hdb7
initrd = /boot/initrd.img
append="devfs=mount hdd=ide-scsi quiet"
vga=788
read-only
image = /vmlinuz.old
label=LinuxOLD
read-only
optional
################ end lilo.conf ######################
Ora, se eseguo lilo
LILO version 22.5.8, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2003 John Coffman
Released 10-Oct-2003, and compiled at 16:48:46 on Feb 13 2004
Debian GNU/Linux
Reading boot sector from /dev/fd0
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/ide/host0/bus0/target0/lun0/disc' -> '/dev/hda'
Name change: '/dev/ide/host0/bus0/target0/lun0/part1' -> '/dev/hda1'
Name change: '/dev/ide/host0/bus0/target0/lun0/part2' -> '/dev/hda2'
Name change: '/dev/ide/host0/bus0/target0/lun0/part3' -> '/dev/hda3'
Name change: '/dev/ide/host0/bus0/target0/lun0/part5' -> '/dev/hda5'
Name change: '/dev/ide/host0/bus0/target0/lun0/part6' -> '/dev/hda6'
Name change: '/dev/ide/host0/bus0/target0/lun0/part7' -> '/dev/hda7'
Name change: '/dev/ide/host0/bus0/target0/lun0/part8' -> '/dev/hda8'
Name change: '/dev/ide/host0/bus0/target0/lun0/part9' -> '/dev/hda9'
Name change: '/dev/ide/host0/bus0/target0/lun0/part10' -> '/dev/hda10'
Name change: '/dev/ide/host0/bus0/target0/lun0/part11' -> '/dev/hda11'
Name change: '/dev/ide/host0/bus0/target0/lun0/part12' -> '/dev/hda12'
Name change: '/dev/ide/host0/bus0/target1/lun0/disc' -> '/dev/hdb'
Name change: '/dev/ide/host0/bus0/target1/lun0/part1' -> '/dev/hdb1'
Name change: '/dev/ide/host0/bus0/target1/lun0/part2' -> '/dev/hdb2'
Name change: '/dev/ide/host0/bus0/target1/lun0/part3' -> '/dev/hdb3'
Name change: '/dev/ide/host0/bus0/target1/lun0/part4' -> '/dev/hdb4'
Name change: '/dev/ide/host0/bus0/target1/lun0/part5' -> '/dev/hdb5'
Name change: '/dev/ide/host0/bus0/target1/lun0/part6' -> '/dev/hdb6'
Name change: '/dev/ide/host0/bus0/target1/lun0/part7' -> '/dev/hdb7'
Name change: '/dev/ide/host0/bus0/target1/lun0/part8' -> '/dev/hdb8'
Name change: '/dev/ide/host0/bus0/target1/lun0/part9' -> '/dev/hdb9'
Name change: '/dev/ide/host0/bus0/target1/lun0/part10' -> '/dev/hdb10'
Name change: '/dev/ide/host0/bus0/target1/lun0/part11' -> '/dev/hdb11'
Using MENU secondary loader
Calling map_insert_data
Warning: The boot sector and map file are on different disks.
Boot image: /vmlinuz -> boot/vmlinuz-2.4.24-1-k7
Mapping RAM disk /initrd.img -> boot/initrd.img-2.4.24-1-k7
Added Linux *
Boot image: /boot/vmlinuz
Fatal: open /boot/vmlinuz: No such file or directory
Linux *
LinuxOLD
Ora, se evince che non riesce a vedere il vmlinuz dell'altra
distribuzione situato in un altra partizione dello stesso hard disk e
che quindi (presumo) non carichi sul floppy ciò che non riesce a
verificare.
Come posso ovviare?
Grazie
--
E impari che puoi davvero sopportare,
che sei davvero forte,
e che vali davvero.
--- ---
HomePage: http://www.massimo.arnaudo.name
LinuxGroup: http://www.lugge.net
========----------
Prima di scrivere in m-list per favore leggi il regolamento
http://www.lugge.net/soci/index.php?link=manifesto
Archivio delle e-mail postate in lista
//www.freelists.org/archives/lugge/
Modifica dell'account sulla lista LUGGe
http://www.lugge.net/soci/index.php?link=manifesto.htm#list
Other related posts:
