allora dopo svariati mesi ho rimesso mano allo scanner (ho red hat 9.0)
ho installato sane (1.0.15) e xsane (0.96) a differenza delle volte
precedenti qualcosa di buono devo aver combinato visto ceh lanciando
xsane lo scanner viene visto ma un messaggio segnala che non è possibile
aprire il dispositivo gt68xx dev/usb/scanner0 l'argomento non è valido
piu' precisamente questo è il msg che appare da terminale:
[gt68xx] Couldn't open firmware file (neither
`/usr/local/share/sane/gt68xx/PS1fw.usb' nor
`/usr/local/share/sane/gt68xx/ps1fw.usb'): No such file or directory
ho un vecchio mustek 1200 ub plus
c'è qualcuno in grado di darmi una dritta?
facendo scanimage -L ho:
device `gt68xx:/dev/usb/scanner0' is a Mustek BearPaw 1200 CU flatbed
scanner
device `gt68xx:/dev/usb/scanner' is a Mustek BearPaw 1200 CU flatbed scanner
e facendo sane-find-scanner
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x05d8, product=0x4002) at /dev/usb/scanner
found USB scanner (vendor=0x05d8, product=0x4002) at /dev/usb/scanner0
found USB scanner (vendor=0x05d8, product=0x4002, chip=GT-6801?) at
libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
grazie infinite dell'eventuale aiuto
-- ciao ku68
========----------
Archivio delle e-mail postate in lista //www.freelists.org/archives/lugge/
Prima di scrivere in m-list per favore leggi il regolamento http://www.lugge.net/index.php?mod=cosa_facciamo/gruppo_di_discussione
Modifica dell'account sulla lista LUGGe http://www.lugge.net/index.php?mod=cosa_facciamo/gruppo_di_discussione#list