[Lugge] Continua il dramma della mia scheda audio ;-)

  • From: Andrea Ungaro <semperfi@xxxxxx>
  • To: "[Lugge]" <lugge@xxxxxxxxxxxx>
  • Date: Thu, 7 Jun 2001 22:32:21 -0400

In prosieguo alla lettera precedente, ho scoperto che la scheda funge se do 
il seguente comando da Konsole:

isapnp  /etc/isapnp.conf

Qualcuno può dirmi dove (esattamente) devo metterlo, in quale script, ecc... 
Per farla andare all' avvio?

Allegato il mio isapnp.conf (che secondo me andrebbe editato, o mi sbaglio?)

Un' altra cosa: qualcuno ha qualche idea su come risolvere i problemi di 
visualizzazione dei font della Mandrake 8.0?

---
Andrea
   @=



-- Attached file included as plaintext by Listar --
-- File: isapnp.conf

# $Id: pnpdump_main.c,v 1.25 2001/01/06 20:45:58 fox Exp $
# Release isapnptools-1.24
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DHAVE_PROC -DENABLE_PCI 
-DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
# 
# Trying port address 0273
# Board 1 has serial identifier e9 4d 00 00 00 68 09 73 16

# (DEBUG)
(READPORT 0x0273)
(ISOLATE CLEAR)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier e9 4d 00 00 00 68 09 73 16)
# Vendor Id ESS0968, Serial Number 1291845632, checksum 0xE9.
# Version 1.0, Vendor version 1.0
# ANSI string -->ESS PnP AudioDrive<--
#
# Logical device id ESS0969
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if 
required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS0968/1291845632 (LD 0
#     Logical device decodes 10 bit IO address lines
#         Minimum IO base address 0x0220
#         Maximum IO base address 0x0250
#         IO base alignment 16 bytes
#         Number of IO addresses required: 16
  (IO 0 (SIZE 16) (BASE 0x0220))
#     IRQ 5, 7, 9 or 10.
#         High true, edge sensitive interrupt (by default)
  (INT 0 (IRQ 5 (MODE +E)))
#     First DMA channel 0, 1 or 3.
#         8 bit DMA only
#         Logical device is a bus master
#         DMA may not execute in count by byte mode
#         DMA may not execute in count by word mode
#         DMA channel speed in compatible mode
  (DMA 0 (CHANNEL 0))
 (NAME "ESS0968/1291845632[0]{ESS PnP AudioDrive  }")
  (ACT Y)
))
#
# Logical device id PNPb020
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if 
required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS0968/1291845632 (LD 1
#     Fixed IO base address 0x0388
#         Number of IO addresses required: 4
  (IO 0 (SIZE 4) (BASE 0x0388))
 (NAME "ESS0968/1291845632[1]{ESS PnP AudioDrive  }")
  (ACT Y)
))
#
# Logical device id PNPb02f
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if 
required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS0968/1291845632 (LD 2
#     Fixed IO base address 0x0201
#         Number of IO addresses required: 1
  (IO 0 (SIZE 1) (BASE 0x0201))
 (NAME "ESS0968/1291845632[2]{ESS PnP AudioDrive  }")
  (ACT Y)
))
#
# Logical device id PNPb006
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if 
required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS0968/1291845632 (LD 3
#     Logical device decodes 10 bit IO address lines
#         Minimum IO base address 0x0300
#         Maximum IO base address 0x0330
#         IO base alignment 16 bytes
#         Number of IO addresses required: 2
  (IO 0 (SIZE 2) (BASE 0x0300))
#     IRQ 5, 7 or 10.
#         High true, edge sensitive interrupt (by default)
  (INT 0 (IRQ 10 (MODE +E)))
 (NAME "ESS0968/1291845632[3]{ESS PnP AudioDrive  }")
  (ACT Y)
))
#
# Logical device id PNP0600
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if 
required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ESS0968/1291845632 (LD 4

# Multiple choice time, choose one only !

#     Start dependent functions: priority acceptable
#       Fixed IO base address 0x0170
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0170))
#       IRQ 15.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 15 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Fixed IO base address 0x01e8
#             Number of IO addresses required: 8
  (IO 0 (SIZE 8) (BASE 0x01e8))
#       IRQ 11.
#             High true, edge sensitive interrupt (by default)
  (INT 0 (IRQ 11 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Fixed IO base address 0x0168
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0168))
#       IRQ 9 or 10.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 9 (MODE +E)))

#     End dependent functions
 (NAME "ESS0968/1291845632[4]{ESS PnP AudioDrive  }")
  (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)


Other related posts: