Re: [ANN]LJJIT2RPi
- From: Tom Yaxley <tommitytom@xxxxxxxxx>
- To: luajit@xxxxxxxxxxxxx
- Date: Mon, 29 Oct 2012 17:30:31 +0000
This is great! Thanks!
On 9 October 2012 03:38, William Adams <william_a_adams@xxxxxxx> wrote:
> I've been hacking on some Raspberry Pi interop stuff. It's by no means
> complete, but I've gotten through a fair amount of stuff that this might
> actually be useful to some people.
>
> The GitHub can be found here:
> https://github.com/Wiladams/LJIT2RPi
>
> The primary focus of this effort thus far was getting bcm_host stuff working.
> That's the raw basics for getting screen size, dealing with media, etc.
>
> Since I already did the Khronos stuff, I'll add that in eventually.
>
> I also threw in Mike's gpio stuff for completeness.
>
> Adding ljsyscall would probably make it the most complete. That would be a
> full blown Linux system from soup to nuts in Lua!
>
> Like I said, a work in progress, but if you want to start hacking on your Pi
> in Lua, this might be helpful.
>
> -- William
> ===============================
> - Shaping clay is easier than digging it out of the ground.
Other related posts:
