[lptv] Re: UDP

  • From: "Jon C. Moon" <jonmoon@xxxxxxxxxxxxxxx>
  • To: lptv@xxxxxxxxxxxxx
  • Date: Fri, 22 Jul 2022 17:17:09 -0400

Thanks Gil, the loop button does the trick!  As always, I was overthinking it!

Jon C. Moon
Ridgeline TV
www.ridgelinetv.net <http://www.ridgelinetv.net/>
Streaming online: 
|  ROKU  |  FIRE TV  |
www.christianworldmedia.com <http://www.christianworldmedia.com/>
www.ginikousa.com <http://www.ginikousa.com/>
https://gia.tv ;<https://gia.tv/>



On Jul 22, 2022, at 4:43 PM, Gil Reynolds <support@xxxxxxxxxxxxxxxxx> wrote:

Yes I'm actually looping an rtsp stream from a weather  camera and converting 
it to rtmp. You can do It two ways. Make sure the loop button is selected 
after you stream, or create a command line instance of vlc to open at start, 
and use I believe the -loop option to have it loop. I'd have to look at my 
command line to make sure it's the loop option. But that is what I do as it 
will continually try to reconnect if the stream goes offline.

Gil Reynolds

870-391-6060

   

On Fri, Jul 22, 2022, 3:19 PM Jon C. Moon <jonmoon@xxxxxxxxxxxxxxx 
<mailto:jonmoon@xxxxxxxxxxxxxxx>> wrote:
So as I was looking at VLC, I noticed you can not only re-stream live feeds, 
but stream video files and playlists of video files.  However, I couldn't 
figure out how to loop a playlist or file when streaming.  Any ideas?

Reason this is interesting is that you might be able to use VLC (free 
program) to playout a simple looping channel and send the transcoded UDP 
transport stream to igolgi or other multiplexers that accept IP streams. 
Cheap way to do an informercial channel.

Jon C. Moon
Ridgeline TV
www.ridgelinetv.net <http://www.ridgelinetv.net/>
Streaming online: 
|  ROKU  |  FIRE TV  |
www.christianworldmedia.com <http://www.christianworldmedia.com/>
www.ginikousa.com <http://www.ginikousa.com/>
https://gia.tv ;<https://gia.tv/>



On Jul 22, 2022, at 3:53 PM, Jon C. Moon <jonmoon@xxxxxxxxxxxxxxx 
<mailto:jonmoon@xxxxxxxxxxxxxxx>> wrote:

In VLC go to the Media menu and down to <Stream>.  Use Network to enter your 
.m3u8 URL.  The wizard guides you to Destination Setup, select UDP and click 
ADD button, then enter an IP address and port on your network where igolgi  
can access.

(I hate auto spell check, it keeps putting igolgi as Igloo!)

Jon C. Moon
Ridgeline TV
www.ridgelinetv.net <http://www.ridgelinetv.net/>
Streaming online: 
|  ROKU  |  FIRE TV  |
www.christianworldmedia.com <http://www.christianworldmedia.com/>
www.ginikousa.com <http://www.ginikousa.com/>
https://gia.tv ;<https://gia.tv/>



On Jul 22, 2022, at 3:39 PM, Dowen ("cdowenj1") 
<dmarc-noreply@xxxxxxxxxxxxx <mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:

Thanks! I saw where it would send just can't figure how to receive and send 
at same time.
I would prefer over subscription but am grateful for all replies.
Dowen

Get BlueMail for Android <https://bluemail.me/>
On Jul 22, 2022, at 2:20 PM, Gil Reynolds <gil@xxxxxxxxxxxxxx 
<mailto:gil@xxxxxxxxxxxxxx>> wrote:
Not sure, but you could do this with vlc. Might want to just try it and see 
if it works. It might not pass all the pertaining stream info but would get 
you a video signal.  

Gil Reynolds 

870-391-6060 

   

On Fri, Jul 22, 2022, 8:33 AM Dowen < dmarc-noreply@xxxxxxxxxxxxx 
<mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote: 
I need to be pointed in right direction. I need to take a video stream, 
such as m3u8, and change it to a udp stream acceptable to the Igolgi. Any 
thoughts? 
Dowen



Other related posts: