Linux boota senza problemi (con loadlin.exe bzimage e passandogli una root image di installazione) ... riconosce tutto di tutto ... vede gli hd (ho dovuto forzare con il parametro "hd=h,c,s" senno' mi vedeva 'na roba del tipo 17000 testine fisiche ! :) quando si tratta di andare a leggere (o scrivere) sui dischi, scrive giu' questo erroraccio: ----------------------------- parte prima: ----------------------------- ... hda: no response (status = 0xff) hda: non-IDE drive, CHS=762/8/39 ... e stessa cosa con hdb ... ----------------------------- ----------------------------- parte seconda: ----------------------------- ... hdb: hdb: status timeout: status=0xff { Busy } hdb: drive not ready for command ide0: reset timed-out, status=0xff hdb: hdb: status timeout: status=0xff { Busy } hdb: drive not ready for command ide0: reset timed-out, status=0xff hdb: hdb: status timeout: status=0xff { Busy } end_request: I/O error, dev 03:40, sector 0 hdb: drive not ready for command unable to read partition table ... ----------------------------- Se a qualcuno viene in mente qualcosa ... grazie ! :) bye !!! Mattia. -- Per iscriversi (o disiscriversi), basta spedire un messaggio con SOGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxxxxxx