> Performing OPC... > cdrecord: Input/output error. send opc: scsi sendcmd: no error > CDB: 54 01 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 73 02 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x73 Qual 0x02 (power calibration area is full) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 37.825s timeout 200s > cdrecord: OPC failed. I've had problems similar to this one. The problem was from 'bad media'. I'm not exactly sure why, but every now and then I can't use a CD-R because of some 'imperfection' on it that linux doesn't like. I just change CD-R's and try again and it works for me. -- # Curt Binder <binder@xxxxxxxxxxxxxx> # ICQ: 3132781 AOL: cbinder69 # http://gotpenguin.com/ # Linux ... because Penguins Rule =) # http://www.mailandfiles.com/