> I have some funny stuff with a D-Link 220 Ethernet card > which I try to configure on a RedHat 6.2 (kernel 2.2.14) > box. First that the card was not automatically recongnized at > the OS install moment, even if it is said the card is supported. > The card is supposed to be NE2000 compatible. Better upgrade your kernel. :) > Kernel IP routing table > > Destination Gateway Genmask Flags MSS Window irtt > Iface 206.147.28.21 0.0.0.0 255.255.255.255 UH 0 0 > 0 eth0 206.147.28.1 0.0.0.0 255.255.255.255 UH 0 0 > 0 eth0 206.147.28.0 0.0.0.0 255.255.255.128 U > 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U > 0 0 0 lo 0.0.0.0 206.147.28.1 0.0.0.0 > UG 0 0 0 eth0 This doesn't look right. I don't know what's wrong with it, but something isn't right here. Perhaps your gateway isn't setup? John -- # John Madden weez@xxxxxxxxxxxxxx ICQ: 2EB9EA # Sys-Admin / Webmaster, Avenir Web: http://avenir.dhs.org # UNIX Systems Engineer, Ivy Tech State College # FreeLists, Free mailing lists for all: http://freelists.dhs.org # Linux, Apache, Perl and C: All the best things in life are free! ============================================================= Avenir Web's Linux Discussion List List info: http://freelists.dhs.org/lists/linux-discussion.html To unsubscribe: email linux-discussion-request@xxxxxxxxxxxxxxxxx with 'unsubscribe' in the Subject line. Administrative contact: weez@xxxxxxxxxxxxxx =============================================================