OK file save libxml2 built and installed.
liblouisutdml:
autogen.sh - runs without issue
./configure --disable-java-bindings - runs without issue
make - fails with the following:
gkearney:liblouisutdml gkearney$ make > make-out.txt
In file included from change_table.c:34:
In file included from ./louisutdml.h:35:
./liblouisutdml.h:171:49: error: unknown type name 'logcallback'
LBUAPI void EXPORT_CALL lbu_registerLogCallback(logcallback callback);
^
./liblouisutdml.h:173:41: error: unknown type name 'logLevels'
LBUAPI void EXPORT_CALL lbu_setLogLevel(logLevels level);
^
In file included from change_table.c:34:
./louisutdml.h:429:21: error: unknown type name 'logLevels'
void logWidecharBuf(logLevels level, const char *msg, const widechar *wb...
^
change_table.c:49:7: warning: implicit declaration of function 'logMessage' is
invalid in C99 [-Wimplicit-function-declaration]
logMessage (LOG_ERROR, "Table %s cannot be found", newTable);
^
change_table.c:49:19: error: use of undeclared identifier 'LOG_ERROR'
logMessage (LOG_ERROR, "Table %s cannot be found", newTable);
^
1 warning and 4 errors generated.
make[2]: *** [liblouisutdml_la-change_table.lo] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1
output from make is included below:
Making all in gnulib
/Applications/Xcode.app/Contents/Developer/usr/bin/make all-recursive
make[3]: Nothing to be done for `all-am'.
Making all in doc
make[1]: Nothing to be done for `all'.
Making all in lbu_files
make[1]: Nothing to be done for `all'.
Making all in liblouisutdml
/Applications/Xcode.app/Contents/Developer/usr/bin/make all-am
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I..
-DLBU_PATH=\"/usr/local/share/liblouisutdml/lbu_files/\"
-DLIBLOUIS_TABLES_PATH=\"/usr/local/share/liblouis/tables/\" -DLBULIB
-I/usr/local/Cellar/liblouis/2.5.2/include/liblouis
-I/usr/local/include/libxml2 -g -O2 -MT liblouisutdml_la-change_table.lo -MD
-MP -MF .deps/liblouisutdml_la-change_table.Tpo -c -o
liblouisutdml_la-change_table.lo `test -f 'change_table.c' || echo
'./'`change_table.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I..
-DLBU_PATH=\"/usr/local/share/liblouisutdml/lbu_files/\"
-DLIBLOUIS_TABLES_PATH=\"/usr/local/share/liblouis/tables/\" -DLBULIB
-I/usr/local/Cellar/liblouis/2.5.2/include/liblouis
-I/usr/local/include/libxml2 -g -O2 -MT liblouisutdml_la-change_table.lo -MD
-MP -MF .deps/liblouisutdml_la-change_table.Tpo -c change_table.c -fno-common
-DPIC -o .libs/liblouisutdml_la-change_table.o
Commonwealth Braille & Talking Book Cooperative
Greg Kearney, General Manager
#320, 185-911 Yates Street
Victoria, BC V8V 4Y9
CANADA
Email: info@xxxxxxxxx
U.S. Address
21908 Almaden Av.
Cupertino, CA 95014
UNITED STATES
Email: gkearney@xxxxxxxxx
On Sep 15, 2015, at 1:32 PM, Cheryl Homiak <cahomiak@xxxxxxxxxxx> wrote:
Oh nuts! Voiceover must have been on the link above when I did vo-shift-m to
copy the link. Obviously I didn't read the link that was pasted before
sending! That still probably would work but here's the latest. Anybody
interested might want to save this email too because it is correcting an
error in the other email.
libxml2-2.9.2.tar.gz
--
Cheryl
Move forward by looking back!
"Above all, fear the Lord
and worship Him faithfully
with all your heart;
consider the great things He has done for you."
(1 Samuel 12:24, HCSb)
On Sep 15, 2015, at 3:20 PM, Cheryl Homiak <cahomiak@xxxxxxxxxxx> wrote:
Here is the whole email again. In the appropriate place I have actually
pasted the exact link to the exact file. Please note that i specifically
stated that I had had to install this! You might want to consider the
pkg-config package I mention also; I can pretty much be sure that if you do
that and it is also installed in /usr/local your libxml should be found with
all its include files.
--
Cheryl
Move forward by looking back!
"Above all, fear the Lord
and worship Him faithfully
with all your heart;
consider the great things He has done for you."
(1 Samuel 12:24, HCSb)
Begin forwarded message:Here is the exact link:
From: Cheryl Homiak <cahomiak@xxxxxxxxxxx>
Subject: [liblouis-liblouisxml] Re: Compiling Liblouisutdml on the Mac
Date: September 8, 2015 at 8:31:17 PM CDT
To: liblouis-liblouisxml@xxxxxxxxxxxxx
Reply-To: liblouis-liblouisxml@xxxxxxxxxxxxx
Okay, i am an admin too but I have always run using sudo in /usr/local and
definitely have to do that when I install. Part of that may be that I have
created an src directory in /usr/local but even though you are an admin,
you might be able to compile without sudo but not install unless it's in
your own home directory or unless you are set up differently than the
default.
At any rate I deleted my git folder of liblouisutdml and reran git clone so
I would have a fresh tree from which to give you my results. Here is what I
get when I run "sudo ./autogen.sh". It didn't give me errors but admittedly
it's not the silent opperation that I get when I run ./autogen in brltty.
After this output I went on and successfully ran ./configure, make and make
install, all of which in my case was done with sudo and the installation
was completed successfully. Of course it's only necessary to run
./autogen.sh when you have updated with git pull and there have been
updates. Also just to be thorough, I should tell you that I installed the
following packages myself since I am not running homebrew or macports;
ordinarily most of this would not be necessary if I was running one of
those:
From ftp://ftp.gnu.org/gnu
autoconf-latest
automake-1.15
libtool-2.4
(I could have gotten autogen too but I think I may have already had it and
these others are also in Macports and homebrew)
from http://pkgconfig.freedesktop.org/releases/
pkg-config-0.28
And finally, the one that solved my libxml problem with liblouisutdml which
actually was my main problem (hmm, i should go back and see if that would
have solved my problem with releases earlier than 2.6.0 or not)
from http://xmlsoft.org/sources/
libxml2-2.9.2
libxml2-2.9.2-rc1.tar.gz
* went down further in that directory instead of grabbing it from the top
and got that specific tar.gz file).
This may sound like a lot of compiling but that is mainly because I chose
not to have macports or homebrew; while I had libxml2 on my Mac I didn't
seem to have one that was recognized unless I installed in my home
directory until I installed this; I have no idea why.
i did all my installs from /usr/local and actually worked from
/usr/local/src
./autogen.sh output from latest git of liblouisutdml om Yosemite (latest
version - the output does differ on different runs)
Cleaning autotools files...
find: illegal option -- t
usage: find [-H | -L | -P] [-EXdsx] [-f path] path ... [expression]
find [-H | -L | -P] [-EXdsx] -f path [path ...] [expression]
find: illegal option -- t
usage: find [-H | -L | -P] [-EXdsx] [-f path] path ... [expression]
find [-H | -L | -P] [-EXdsx] -f path [path ...] [expression]
Running autoreconf...
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
libtoolize: copying file `build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
configure.ac:29: installing 'build-aux/compile'
configure.ac:33: installing 'build-aux/config.guess'
configure.ac:33: installing 'build-aux/config.sub'
configure.ac:10: installing 'build-aux/install-sh'
configure.ac:10: installing 'build-aux/missing'
Makefile.am: installing './INSTALL'
doc/Makefile.am:16: installing 'build-aux/mdate-sh'
doc/Makefile.am:16: installing 'build-aux/texinfo.tex'
gnulib/Makefile.am: installing 'build-aux/depcomp'
liblouisutdml/Makefile.am:61: warning: source file
'../java/Jliblouisutdml.c' is in a subdirectory,
liblouisutdml/Makefile.am:61: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the
'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding
output
automake: object file(s) will be placed in the top-level directory.
However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same
subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout
your
automake: project, to avoid future incompatibilities.
parallel-tests: installing 'build-aux/test-driver'
--
Cheryl
Move forward by looking back!
"Above all, fear the Lord
and worship Him faithfully
with all your heart;
consider the great things He has done for you."
(1 Samuel 12:24, HCSb)
For a description of the software, to download it and links to
project pages go to http://liblouis.org