> Hi Xavier, > Re second shot: All I get is solid black. > Bill I get a solid grey... but either way, no picture. David. > > > On Feb 18, 2013, at 12:30 PM, Bille Xavier F. <hot_billexf@xxxxxxxxxxx> > wrote: > >> Good Day Flexers. >> >> I have no superb images to offer, Marc Dufour has presented lately >> something I would not compete with.... Bravo Camarade ! >> >> No, really, my 'niche', a.K.a 'speciality' is rather the 'what do I >> get when.....' >> >> Today, something rather interesting and a quizz to win a superb post >> card of Paris. >> >> I have been using the Compact Lumix LX5 and wondered if a Raw image is >> as Raw as on the Digilux 3. In fact the LX5 comes in a second or even >> third generation after the Digilux3 and often the solution to resolve >> a need is different. >> >> All right, not teasing more, let's dive. Here is a picture taken in >> raw mode, developped with Silkypix, normal, the white balance was >> rather set to another specific place, my underground, hence the >> blueish cast, mostly due to a end of a sunny day while the main light >> was artificial: >> >> http://xavierf.b.free.fr/Temp/BWSurpriseLX5/P1010733_dev.jpg >> >> >> Now, same compact LX5, same light but I applied a different 'taste' of >> film, dynamic B&W, here is the Jpeg, resized: >> >> http://xavierf.b.free.fr/Temp/BWSurpriseLX5/P1010736_root.jpg >> >> All right, a few Bretzel have gone, the image may look a bit muddy >> (but not that bad, any way, at resolution of 1200 dots, you can hardly >> say otherwise....). Now, look at the raw image stored by the camera >> and plainly developped in Silkypix (version 5, all of them anyway): >> >> http://xavierf.b.free.fr/Temp/BWSurpriseLX5/P1010736_dev.jpg >> >> To tell you, when the last image is opened by silkypix, it shows out >> of range values for the balance..... >> >> Now, quizz: what is the idea behind this set up, why is it much better >> to develop inboard an image like this? >> >> Your postcard is on the way..... >> >> To finish up, the raw images of taste B&W dynamic taken with the >> Digilux 3 do not look like this. Here on the compact, it's a trick to >> optimize another process..... Why not! >> >> A very interesting system apprach, in my eye. I'll tell you what is >> behind... Cheers! #----------------------------------- From : Xavier >> F. BILLE mail : hot_billexf@xxxxxxxxxxx Maisons Alfort - France ------ Unsubscribe or change to/from Digest Mode at: http://www.lrflex.furnfeather.net/ Archives are at: //www.freelists.org/archives/leicareflex/