[LRflex] Re: Seaplanes taking off

  • From: David Young <dsy@xxxxxxxxxxxxx>
  • To: <leicareflex@xxxxxxxxxxxxx>
  • Date: Sun, 21 Oct 2018 22:02:07 -0700

A fascinating set of shots, Howard.

The prop-wash is an amazing capture!  At  first I thought it was some sort of 
wire fence, on the shore, and then "the penny dropped"!

Well done, Sir!

David.



Hi Flexers,
Was at the South Seaplane Terminal this afternoon and took a few
pictures with my M10 and the 90mm Elmarit.
I settled on 1/180 as slow enough to have a blurred prop spin but high
enough to have a sharp plane.


The first picture is shot in continuous low speed:


<http://gallery.leica-
users.org/v/Howard+Cummer/2018+photos/SeairCaravan.jpg.html>


The following two pictures were shot with the same shutter speed and
aperture but on continuous high speed:


<http://gallery.leica-
users.org/v/Howard+Cummer/2018+photos/HarbourAirTurbo.jpg.html>


<http://gallery.leica-
users.org/v/Howard+Cummer/2018+photos/HarbourAirTurbo1.jpg.html>


Please check out the prop wash on these photos. When I first looked I
thought maybe my M10 was acting up from being in continuous mode but on
reflection I think high humidity may be a more likely answer.


Any insights would be welcome.


You can look large if you wish,


Howard
------
Unsubscribe or change to/from Digest Mode at:
   http://lrflex.furnfeather.ca/
Archives are at:
    //www.freelists.org/archives/leicareflex/

Other related posts: