Hi Art! Now that sound reasonable! And I have an old 2x converter to which a null cam was added by Kindermann= as part of an overhaul (it had been submersed in water, thanks to a= basement flood!); so I now know just where to put it. Thanks! David. ------------ On 21/08/2005 at 7:38 PM NATSTEK@xxxxxxx wrote: >Doug, >Correct me if I'm wrong. > >The early 3part tube has no "Null" lug on the rear flange for 3, or 3rd >cam >use to null the meter for stop-down metering. The later ones do have a lug= >inside of the rear flange. > >I've done the 3rd cam conversion on an early set that I had, by taking a >meter lug off of a aftermarket Olympus T-mount (it unscrews easily), and >properly >locate the needed position on the rear flange. Once this is done, drill a >new >hole inside of the rear tube section and screw the Olympus lug in place >and >bend as needed to properly orient the lug. > >Worked for me. > >Art Tafil > > >------ >Unsubscribe or change to/from Digest Mode at: > http://www3.telus.net/~telyt/lrflex.htm >Archives are at: > www.freelists.org/archives/leicareflex/ David Young, Logan Lake, BC CANADA. Personal Web-site at: http://www3.telus.net/~telyt Leica Reflex Forum web-page: http://www3.telus.net/~telyt/lrflex.htm ------ Unsubscribe or change to/from Digest Mode at: http://www3.telus.net/~telyt/lrflex.htm Archives are at: www.freelists.org/archives/leicareflex/