[LRflex] Re: An odd problem...

  • From: David Young <dsy@xxxxxxxxxxxxx>
  • To: <leicareflex@xxxxxxxxxxxxx>
  • Date: Wed, 30 Aug 2017 09:21:21 -0700

Oh, my, Aram.  It IS early in the morning, for you, isn't it?  ;-)

Any images showing this effect?

See: http://www.furnfeather.ca/eclipse/double.html  ;(from email to which you 
are replying).

I used exposed film for my filter and do not see any stray light when it was
on.

It's not "stray" light, but rather light reflected from the sensor, to the back 
of your filter, and back again.

Because you used film, I'm willing to bet that any reflections would (a) be 
small if at all, due to the matte surface of the film and (b) directed away 
from the sensor by the film not being perfectly flat.

It was because of the reflections from the rear element coatings of the Leitz 
80~200/f4 Vario that caused me to sell it.  The effect did not happen often, 
but it was a consistent problem with that lens, on the R8/DMR, the Canon 20D 
and the Olympus E3.

David.



Aram

-----Original Message-----
From: David Young
Sent: Tuesday, August 29, 2017 10:36 PM
To: LRflex
Subject: [LRflex] An odd problem...

After totality, at the eclipse, I noticed an odd problem in my photos...  a
double image.

http://www.furnfeather.ca/eclipse/double.html

I quickly realized it was the same problem as with some photos I took with
the DMR/R8  combination that had a blue tint in the middle of the image.

It is a problem that does not occur with film, because film has a matte
surface.

But sensor's are shiny, with glass on top, to be even more shiny.

One of the main challenges, in the digital age, for lens/camera makers, was
to make the coatings on lenses less reflective.  You see, in limited cases
with older lenses designed for film, the light would reflect off the sensor,
back to the rear element of the lens, and then back to the sensor - ad
nauseum.  The result was a blue patch (in the case of my Leitz 80-200/4
Vario) and the result can clearly be seen as a blue patch in the middle of
tis shot of my old Beauty Six camera, shown here:

http://www.furnfeather.ca/eclipse/BeautySix.html

It's worse with a glass solar filter, as the inside is a perfect mirror.

I realized that when I'd put the filter on my Telyt, for the first half of
the eclipse, it was a wee bit crooked.   As it made no difference, I'd not
bothered to correct it and thus disturb my alignment, but when I put the
filter back on, after totality, I got it "right" - squarely on the lens.
That's when the problem occurred.

The simple cure was to once again, put the filter at an angle.  Like so:

http://www.furnfeather.ca/eclipse/cure.html

Problem solved!

It's a little late for this eclipse, but if you're planning on the 2023 or
2024 eclipses (we are!), it's something you may want tuck away, in the back
of your mind, for future reference.

David.

--
David Young - Photographer
Logan Lake,BC, CANADA
Website: www.furnfeather.ca
Gallery: The Creative Co. Merritt, BC.
E-book: http://tinyurl.com/ABHoP


------
Unsubscribe or change to/from Digest Mode at:
  http://www.lrflex.furnfeather.ca/
Archives are at:
   //www.freelists.org/archives/leicareflex/

---
This email has been checked for viruses by AVG.
http://www.avg.com

------
Unsubscribe or change to/from Digest Mode at:
  http://www.lrflex.furnfeather.ca/
Archives are at:
   //www.freelists.org/archives/leicareflex/
------
Unsubscribe or change to/from Digest Mode at:
   http://www.lrflex.furnfeather.ca/
Archives are at:
    //www.freelists.org/archives/leicareflex/

Other related posts: