[LandXML] Re: LandXML - Bentley/In Roads to Land Desktop 2006
- From: "Eric Rohlfs" <ericx@xxxxxxxxxxxxx>
- To: <Richard.Bradshaw@xxxxxxxxxxx>, <stwomey@xxxxxxxxxxxxxx>, <landxml@xxxxxxxxxxxxx>
- Date: Mon, 12 Dec 2005 15:40:12 -0500
Can you send me the file?
-----Original Message-----
From: Richard.Bradshaw@xxxxxxxxxxx [mailto:Richard.Bradshaw@xxxxxxxxxxx]
Sent: Monday, December 12, 2005 3:13 PM
To: Eric Rohlfs; stwomey@xxxxxxxxxxxxxx; landxml@xxxxxxxxxxxxx
Subject: RE: [LandXML] Re: LandXML - Bentley/In Roads to Land Desktop
2006
The file validates in XML Spy, so it should be readable by LDD. R. W.
Bradshaw Bentley Civil
-----Original Message-----
From: landxml-bounce@xxxxxxxxxxxxx [mailto:landxml-bounce@xxxxxxxxxxxxx]
On Behalf Of Eric Rohlfs
Sent: Monday, December 12, 2005 1:31 PM
To: stwomey@xxxxxxxxxxxxxx; landxml@xxxxxxxxxxxxx
Subject: [LandXML] Re: LandXML - Bentley/In Roads to Land Desktop 2006
A quick test is:
Run the landxml reporting toolkit, open your bently document and try to
run some style sheets against in (creat reports.) If it works in the
AutoCAD LandXML reporting toolkit, then... If it does not work open it
in Altova XML Spy Home edition and see if it is valid xml.
-----Original Message-----
From: Sean Twomey [mailto:stwomey@xxxxxxxxxxxxxx]
Sent: Monday, December 12, 2005 11:20 AM
To: landxml@xxxxxxxxxxxxx
Subject: [LandXML] LandXML - Bentley/In Roads to Land Desktop 2006
Hi, I am trying to figure out how to import an XML file into Land
Desktop 2006 (all patches). It's a real struggle on the user level to
actually get XML to work properly. It seems like a pretty straight
forward concept but I can not get it to work properly from a Bentley
product to Land Desktop. As I understand it, Land Desktop is pretty
much the instigators of the LandXML format. I know XML is a loose set
of data coding/formatting and that LandXML is trying to tighten this up
with a set of standards. Is this an issue between Bentley and AutoDesk?
I emailed a Bentley official once and he seemed to indicate that
Bentley's thoughts on XML was that it is a way to get raw data to
another computer/cad platform as opposed to a finished surface or
complete alignment etc... Does this ring true?
If anyone has any help on this I would appreciate it, or at least some
sort of steer in the correct direction! To recap I just want help in
importing an XML file (a 26 mb file) purportedly from Bentley Inroads
into Land Desktop 2006 format.
Thanks!
Sean Twomey
Dibble & Associates
Survey Technician, LSIT
2633 E Indian School Rd Suite 401
Phoenix, AZ 85032
Phone 602.957.1155 Mobile 602.540.7301
Fax 602.957.2838
Dibble & Associates Inc.
Other related posts:
