Hi SK, the machine is calling for which port is required. I believe it is port
4 but I don’t want to change anything. Lise came in hoping to the machine as
well. Lee
Sent from my iPhone
On May 27, 2019, at 9:00 AM, Un SungKyong <00heights@xxxxxxxxx> wrote:
Hi all,
Norm has installed an IoT power switch (photo below) which controls router
ON/OFF automatically.
Now we don’t need to turn ON/OFF the router switch manually, just leave the
router power switch ON position.
Just follow the graphical guide of EASEL program. There is a ’Start Spindle’
button on the last page of ‘CARVE’.
It also works with ‘pause’ and ‘resume’ buttons on the controller front panel.
When you press ‘pause’ button, it stops the router. When you press ‘resume’
button, it restart the router just before it touches the workpiece.
Thank you Norm for the power switch.<IMG_5233.jpeg>
Sungkyong
-------------------------------
SungKyong Un
Programming for Life, of the Life and of my Life
flickr.com/ 00heights .wordpress.com @gmail.com
