[kwcnc] Assembly Update & Leaning Materials

  • From: Un SungKyong <00heights@xxxxxxxxx>
  • To: kwcnc@xxxxxxxxxxxxx
  • Date: Thu, 28 Mar 2019 21:55:29 -0400

Hi folks,

Even though three are some parts to be finished, the assembly is nearly done.
Everything works fine and now the machine is moving!

Before the shop announces the schedule, it is good time to find out what we can 
do with this machine.
The following is some Youtube video links to show what it can do.

https://youtu.be/Uv0BEqCT21I ;<https://youtu.be/Uv0BEqCT21I>
https://youtu.be/eYLlD8xmYXk ;<https://youtu.be/eYLlD8xmYXk>
https://youtu.be/vZl8wW4hOR0 ;<https://youtu.be/vZl8wW4hOR0>
https://youtu.be/e6xZOdQEqfw ;<https://youtu.be/e6xZOdQEqfw>

If you are new to CNC programming, here is the good starting point to learn.

https://inventables.desk.com/customer/en/portal/topics/1022638-easel-tutorials ;
<https://inventables.desk.com/customer/en/portal/topics/1022638-easel-tutorials>
https://www.youtube.com/watch?v=nNSqHzCvgrU ;
<https://www.youtube.com/watch?v=nNSqHzCvgrU>

If you have some experience to CNC programming, check this out.

https://support.vectric.com/tutorials/V9/?software=3&category=1&order=1 ;
<https://support.vectric.com/tutorials/V9/?software=3&category=1&order=1>
https://www.autodesk.com/products/fusion-360/blog/getting-started-introduction-to-cam-and-toolpaths/
 
<https://www.autodesk.com/products/fusion-360/blog/getting-started-introduction-to-cam-and-toolpaths/>
https://youtu.be/iqnvzxuXFTQ ;<https://youtu.be/iqnvzxuXFTQ>

SK
-------------------------------
SungKyong Un
Programming for Life, of the Life and of my Life
flickr.com/ 00heights .wordpress.com @gmail.com


Other related posts:

  • » [kwcnc] Assembly Update & Leaning Materials - Un SungKyong