oooph, i just picked up a buffalo tech card with broadcom drivers since its fully airport compatible. I thought it would be nice to just slip it in when i needed a better signal - also the buffalo has an antenna connector.
how well does the software work for the Prism2 devices?
further, are there any cheap options? $60 is fair but considering that it would be my third card, i'm feeling a bit cheap.
many thanks, matt
Passive mode means that you are "listening" for packets only and not broadcasting any information. Passive mode does not mean packet injection is supported. They are different characteristics of the wireless device.
In KisMAC, injection is only supported by Prism2 devices. Apple's airport card is based on the hermes chipset so it supports passive mode, but not injection. Apple airport extreme is based on a Broadcom chipset that is really only useful for active mode scanning. Until Broadcom releases the technical documents around it's chip sets, the only solution is reverse engineering, often leading to quirky and unreliable drivers.
On May 2, 2006, at 11:27 AM, Matt Kime wrote:
> Then why does kismac list a Apple Airport (not extreme) passive mode > driver in the software? I've found a lot of contradictory info on > this. > > --matt > > On 5/2/06, Erik Winkler <ewinkler@xxxxxxxxx> wrote: >> That feature only works with prism2 based pcmcia or USB wireless >> devices. Your airport card uses a hermes chip set (like the Orinoco >> cards). >> >> If you want to take advantage of all KisMAC features I recommend you >> get one of these cards: >> >> http://www.keenansystems.com/store/catalog/product_info.php? >> cPath=2&products_id=5&osCsid=5075ce873f558518f3c5d8096715e498 >> >> It is the one I use with my G4 Ti book and it works flawlessly under >> 10.4.6. >> >> Erik