[kismac] Re: help with dwl-122 (timeout errors)

  • From: numE <numE@xxxxxxxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Fri, 24 Feb 2006 18:49:34 +0100

I just tried passive scanning again with my dwl-122.
i had to restart sometimes in the past to get it running,
but now i tried it several times and always had no luck.

console log:
2006-02-24 18:45:47.564 KisMAC[10150] USBIntersilJack is now ready to
start working.
2006-02-24 18:45:47.889 KisMAC[10150] USBIntersilJack: Detected a Prism2
2006-02-24 18:45:47.928 KisMAC[10150] USBIntersilJack: Firmware vendor
31, variant 1, version 1.7
2006-02-24 18:45:47.929 KisMAC[10150] USBIntersilJack: MAC 0x0 0x11 0x95
0x82 0xad 0x66
2006-02-24 18:45:48.037 KisMAC[10150] error from async interruptRecieved
2006-02-24 18:45:48.038 KisMAC[10150] unable to do async interrupt read
(e000404f). this means the card is stopped!
2006-02-24 18:45:53.001 KisMAC[10150] Timeout error.
2006-02-24 18:45:53.002 KisMAC[10150] Timeout error.

any hints?



Other related posts: