[kismac] Re: USB branch, ralink RT2500, "No supported USB device found!"

  • From: Jeroen <jeroen@xxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Wed, 10 Jan 2007 01:13:11 +0100

I tried (I think), didn't work.
when trying the ralink driver (RT2500) kismac said it thought i use an rt73 chipset. when trying the rt73 driver kismac hangs, because the rt73 driver is not ppc compatible.

the RT2500 drivers do indeed work, I apparently need the rt73 variant, which as noted is not ppc compatible.


On 10 Jan 2007, at 00:59, Bug Dave wrote:

You should enable "USB Drivers" as the driver for the ralink device. I have a ppc powerbook g4 1.67 and I can confirm that it works for me. The ralink drivers for kismac were developed and tested first using a similar powerbook by geoff.

On Jan 9, 2007, at 4:09 PM, Jeroen wrote:

Hello Dave,

I did try it that way.

I am on a ppc

Which ralink driver should work for my device?
Which ralink driver works on ppc?
Is there anything else I need to change to add the device?

I'm more confused now than I was before subscribing to the list... :/


I put the questions on top as I have the impression they tend to get lost down there where i would put them

Other related posts: