my airport extreme has gone over 100-120 at times in passive, while in active the same networks usually run about 60 - 80, so I would think it matters what hardware AND what driver. On 2/27/06, m0bilitee <m0bilitee@xxxxxxxxx> wrote: > Or, if Kismac would "scale" it so it was consistent across adapters? > > > > > On 2/27/06, Geoffrey Kruse <gkruse@xxxxxxxxxxxxxx> wrote: > > I think this may be dependent on the driver. For example, my usb > > card seems to have a range of 0 to 40 while my airport extreme seems > > to have a range of 0 to 100. It would be nice if we used something > > more standard like dbm. > > > > Geoff > > On Feb 27, 2006, at 7:58 AM, Mike Williams wrote: > > > > > Hi, > > > in KisMAC and other WiFi apps there is the "Signal"-strength- > > > number. From which number to which number does this go? > > > The highest number I've seen was 101. Most networks are about 61 > > > and some are 31 or so. > > > What is the smallest and the highest number that could appear? > > > > > > Regards > > > > > > > > > > > >