I think the issue is simply NOT to reload the driver, but to enable
passive mode at startup - it can live alongside managed mode just
fine. The issue here is NOT enabling monitor mode, but reloading the
driver with it enabled.
If we just change the APMonitorMode key to YES, and leave it there, it only turns on when someone is capturing from the wlt1 interface.
Our problem IS relaoading the driver...
On 15/02/2006, at 9:37 AM, Robin L Darroch wrote:
It is sounding more and more like the key to getting KisMAC to work in passive mode with airport extreme is to ensure that nothing else tries to use the Airport Extreme card for anything, *ever*. Even after a normal reboot, my iBook G4 won't scan in passive mode with the Airport Extreme, presumably because things that load automatically on startup (such as network time synchronization) start using it. The only way I can make passive airport extreme scanning work is to do a safe mode reboot (i.e. hold "shift" all the way from the startup chime until login is complete). Then it works like a charm...
Your mileage may vary from what I am about to say.
If you have your airport card turned off and start kismac it has worked for
me. I have tested build r82 on Friday and r83 today on my powerbook that has
been up for over 4 days. This was done with my normal gambit of programs
running using my Ethernet connection.
P.S. This has survived multiple starts and stops of kismac.
-- Ron Rosson ron.rosson@xxxxxxxxx http://www.oneinsane.net
From: Nate Gallagher <natevoodoo@xxxxxxxxx> Reply-To: "kismac@xxxxxxxxxxxxx" <kismac@xxxxxxxxxxxxx> Date: Mon, 13 Feb 2006 13:08:33 -0800 (PST) To: "kismac@xxxxxxxxxxxxx" <kismac@xxxxxxxxxxxxx> Subject: [kismac] Re: [OpenSVN] r84 committed.
How do I install the airport extreme driver?
When I try to run the kismac program with passive airport extrem it
makes the airport disappear for other applications until I restart.
But it also doesn't work for kismac saying that the driver is missing.
--- mick.bi@xxxxxxxxxxxxxxxx wrote:
mick Mon Feb 13 20:04:14 2006 UTC
Log: fixing build problems, if path contained spaces
Flag Changes Path U +20 -14 KisMACng/KisMAC.xcodeproj/mick.mode1 U +119 -32 KisMACng/KisMAC.xcodeproj/mick.pbxuser U +1 -1 KisMACng/compile.command
Robin L. Darroch - PO Box 2715, South Hedland WA 6722 - +61 421 503 966
robin@xxxxxxxxxxxxx - robin@xxxxxxxxxxx - robin@xxxxxxxxxxxxx