[kismac] Re: Off topic: MN-510 installation

  • From: Michael Rossberg <mick@xxxxxxxxxxxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Thu, 6 May 2004 17:24:24 +0200

Hi Dan,

Hi Mick,
Sorry for this off topic post again. If this is too off topic please suggest
somewhere else to post. Thanks for the installation instruction you put on
the wiki. I am using the Dlink WirelessUsbDriver1.3.2 on 10.3.3. My problem
is with lines 6 & 7:

6.edit Archive.pax and search for "<integer>14080" change the following >number
from 14080 to 16656
7.change the number which follows "<integer>8193" from 8193 to 2118

I assume these two numbers are the Vendor ID and Product ID ?

correct.

They are
different to my MN-510 which displays the following properties in the system
profiler:
Wireless USB Adapter MN-510:

  Vendor Name:    MicrosoftÆ
  Speed:    Up to 12 Mb/sec
  Product ID:    110 ($6e)
  Bus Power (mA):    500

What do I do in this case as I have only one ID the Product ID (110) and no
Vendor ID.

the vendor id for microsoft is 1118. i dont know why it does not show up.

mick

Other related posts:

  1. Home
  2. kismac
  3. Archive
  4. 05-2004