[kismac] Re: High Output Cards that work with Kismac?
- From: Tim Baldwin <lucid8@xxxxxxxxxx>
- To: <kismac@xxxxxxxxxxxxx>
- Date: Fri, 28 Nov 2003 15:28:22 -0800
Has anyone tried using the senao/engenius card with the new macsense driver?
It seems that macsense is just rebranding a senao card, but they have
drivers for os 10. Would someone with a senao card be willing to try this
out?
http://macsense.com/driver/mac/aerocardx203b3.sit
tim
> From: Robert B.Peirce <rbpeirce@xxxxxxxxxxxx>
> Reply-To: kismac@xxxxxxxxxxxxx
> Date: Sun, 23 Nov 2003 17:23:40 -0500
> To: kismac@xxxxxxxxxxxxx
> Subject: [kismac] Re: High Output Cards that work with Kismac?
>
> It was working for me under prior releases and is still working under
> 10.2.8. That is not to say you might not have a problem doing an
> initial install under 10.2.8. I don't know about that, but upgrading
> to 10.2.8 had no adverse affect that I could see. Of course I am also
> using a card that worked under 10.2.6. That also may be your problem.
>
> On Sunday, November 23, 2003, at 03:29 PM, wire less wrote:
>
>> Has anyone tried the sourceforge driver under 10.2.8 or panther and
>> got it to work?
>>
>> I have been having no luck and am getting frustrated?
>
>
>
>
Other related posts: