[kismac] D-Link DWL-G650
- From: Mathieu Masseboeuf <mathieuma@xxxxxxxxxxxxxxxxxxxxx>
- To: kismac@xxxxxxxxxxxxx
- Date: Thu, 3 Nov 2005 15:22:18 +0100
Hi,
I just bought a D-Link DWL-G650 (Rev C3) PCMCIA card in order to
check it out with Kismac - but I don't manage to load the driver for it.
According to what I see logged by the kernel, it's an atheros card as
the previous revisions (from what I saw googling, it's using the
AR5002 chip) - and madwifi seems to support it, at least from what I
could read.
Anyone have a clue on what I could try or if there is no hope with
it ? (using SVN r76 of Kismac)
Here is what is logged (the AtheroJack error is pretty bad, won't be
able to receive anything with that :p)
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOPCCard info: cs:
cb_alloc(bus 1): vendor 0x168c, device 0x0013
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOPCCard info: cs:
cb_alloc(bus 1): found 1 functions
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOCardBusDevice: binding
socket 0 function 0 to card services.
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOPCCard info: cs:
cb_config(bus 1)
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOPCCard info: fn 0
bar 1: mem 0x90010000-0x9001ffff
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: IOPCCard info: irq 255
Nov 3 15:10:47 Mathieu-PowerBook kernel[0]: AtheroJack:
initHardware: 130: No valid modualtion mode found!
Nov 3 15:11:01 Mathieu-PowerBook authexec: executing /Applications/
KisMAC.app/Contents/Resources/atheros_load.sh
Thanks, Mathieu Masseboeuf
Other related posts:
- » [kismac] D-Link DWL-G650