Thanks for the link, but it only has the utility to load firmware, not the actual firmware itself:( On Thursday, August 28, 2003, at 01:12 AM, Bruce Lum wrote: > Patrick, > Here's a Cisco link for Aironet utilities, hope this helps you. > <http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet-utils-mac> > -Bruce Lum- > > > On Wednesday, August 27, 2003, at 06:08 PM, N. Karras wrote: > >> The device itself may be defective or damaged. >> ----- Original Message ----- >> From: "pgcudahy" <pgcudahy@xxxxxxxxxxxxxxxxxxx> >> To: <kismac@xxxxxxxxxxxxx> >> Sent: Wednesday, August 27, 2003 7:01 PM >> Subject: [kismac] Cisco firmware >> >> >> : Does anyone have a Cisco Aironet 350 firmware image? I got one off >> eBay >> and >> : its firmware seems to be fried. Cisco's site only has a .exe file >> for the >> : firmware. I just need a .img file of it. Thanks >> : -Patrick Cudahy >> : >> >> >> > > > Technology: opening minds with a new set of keys > .........Craig Nansen > ********************************************** > Bruce Lum > Web Development Mgr. > Kamehameha Schools > 567 So. King St., Suite 301 > Honolulu, Hawaii 96813 > > Tel: 808-523-6347 > FAX: 808-541-5305 > email: brlum@xxxxxxxx > > DISCLAIMER: > The views described herein are the views of the author, and > do not represent the views or opinions of Kamehameha Schools, > nor is there any approval or authorization of this material, > express or implied, by the Kamehameha Schools. If you suspect > that any of the material in this message or attachments > thereto is in violation of a copyright, please notify the > Webmaster immediately by e-mail at "Webmaster@xxxxxxxx". > >