[kismac] Re: Airport Extreme Driver Not Found
- From: Nick Coffey <ncoffey@xxxxxxxxx>
- To: kismac@xxxxxxxxxxxxx
- Date: Fri, 4 Nov 2005 02:27:58 -0330
I had it working on 10.4.2. I had to restart the computer when I wanted it
to work, and make sure any network applications were shut down. I then
turned off the airport and ran kismac. This may or may not solve your
problem, though it's a workaround and not a solution. Good luck.
Nick
On 11/3/05, super kev <blaster42@xxxxxxxxxxx> wrote:
>
> I'm curious if anyone has solved the AE passive mode problem mentioned in
> this thread?
>
> //www.freelists.org/archives/kismac/09-2005/msg00014.html
>
> My PB with r75 tries to load the passive driver, and then says that it
> could
> not enable monitor mode for AE, because drivers weren't found. I can see
> it
> disable Airport (turn it off) and then it will turn it back on just before
> the error, but that's about as far as it gets. And about half of the time
> it freezes when trying to load the passive driver. This is on a new
> powerbook (G4 1.5Ghz, 10.4.0) and I haven't updated it to 10.4.3 yet.
>
> Thanks.
>
>
>
>
Other related posts:
