Nels, Try specifying a DNS server or two. GCI has a couple, though I can't recall their IP's. Ditto ACS. Chuck ----- Original Message ----- From: Nels Tomlinson <nelstomlinson@xxxxxxx> Date: Friday, July 11, 2003 0:42 am Subject: [juneau-lug] networking help, please? > Hi, > > I finally got my computer running again (yes, it was a bad fan on > the > CPU; it spun, but too slowly), and I decided to install Knoppix > instead > of the redhat 7.x which was on there. That's when the troubles began. > > I can get wvdial to dial gci, but once I'm connected, I can't seem > to > get anywhere. Can't resolve urls, can't ping anything I know the > address for (slashdot is 65.35.250.150, I think). Somehow, it > wants to > use eth0 instead of ppp0. When I do ``ifconfig eth0 up'', it > tries to > resolve urls, and times out. When I do ``ifconfig eth0 down'', it > tells > me it can't reach the network. All the while, I'm dialed into GCI > and > ppp0 is ``up'', according to ifconfig. > > Does anyone have a clue about how I tell the box to ignore the > ethernet > card when pppd is active? > > Thanks, > Nels > > > ------------------------------------ > This is the Juneau-LUG mailing list. > To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx > with the word unsubscribe in the subject header. > ------------------------------------ This is the Juneau-LUG mailing list. To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the word unsubscribe in the subject header.