[juneau-lug] P-90

  • From: James Zuelow <e5z8652@xxxxxxxxxx>
  • To: jlug <juneau-lug@xxxxxxxxxxxxx>
  • Date: Mon, 2 Sep 2002 09:49:32 -0800

I picked up another HP Vectra P-90 at State Surplus last week, to use for 
clinic meetings.  These are dual processor boxes, however the one at Surplus 
only had one P90 in it.  Using a faster processor is kind of a waste, as the 
motherboard treats any faster processor as a P90.

So if anyone on the list has an extra P90 laying around, it would be cool to 
have here.  I can trade you a P133, or else I have a couple of AMD K6 CPUs to 
trade as well (233s I think - I'll have to dig them up and check).

I also have several donated **AT** style super-Socket 7 boards that will accept 
Pentium, Pentium-MMX, K6, K6-2, Media-GX, or Cyrix 5x86 processors.  Jumper 
selectable 66MHz or 100MHz FSB.  If you have an old AT style case & power 
supply this might be a good upgrade for a lower end Pentium board.  (Perhaps a 
P90.)

Cheers,

James

------------------------------------
This is the Juneau-LUG mailing list.
To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the 
word unsubscribe in the subject header.

Other related posts:

  1. Home
  2. juneau-lug
  3. Archive
  4. 09-2002