[juneau-lug] Re: JLUG Server
- From: James Zuelow <e5z8652@xxxxxxxxxx>
- To: juneau-lug@xxxxxxxxxxxxx
- Date: Tue, 2 Jan 2007 21:10:16 -0900
Here's the dmesg output. Hope there aren't too many =20 or =3D or
what-have-you in the report. This thing is very loud.
The stock kernel works, but has some issues - MTRR, and of course AGP doesn't
work. We might want to tweak a kernel for this machine.
James
--------------------------------------------------------------------------------------------------------------------------
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@xxxxxxxxxx) (gcc version
4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000087ffc000 (usable)
BIOS-e820: 0000000087ffc000 - 0000000088000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1279MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4ff0
On node 0 totalpages: 557052
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 327676 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000f4f90
ACPI: RSDT (v001 COMPAQ RACEBAIT 0x00000002 � 0x0000162e) @ 0x87ffc000
ACPI: FADT (v001 COMPAQ LANGLEY 0x00000002 � 0x0000162e) @ 0x87ffc040
ACPI: MADT (v001 COMPAQ 00000083 0x00000002 0x00000000) @ 0x87ffc100
ACPI: SSDT (v001 COMPAQ SSDT 0x00000001 MSFT 0x0100000b) @ 0x87fff800
ACPI: SPCR (v001 COMPAQ SPCR_ROM 0x00000001 � 0x0000162e) @ 0x87ffc180
ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x240
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-34
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 90000000 (gap: 88000000:76c00000)
Detected 996.928 MHz processor.
Built 1 zonelists. Total pages: 557052
Kernel command line: root=/dev/cciss/c0d0p2 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2201636k/2228208k available (1543k kernel code, 25312k reserved, 574k
data, 196k init, 1310704k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1994.84 BogoMIPS
(lpj=3989694)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel Pentium III (Coppermine) stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1993.86 BogoMIPS
(lpj=3987722)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 06
Total of 2 processors activated (3988.70 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=803
checking if image is initramfs... it is
Freeing initrd memory: 4372k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0084, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:05.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:05)
PCI: Probing PCI hardware (bus 05)
PCI: Firmware left 0000:05:09.0 e100 interrupts enabled, disabling
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: Resource is not an IRQ entry
ACPI Error (uteval-0223): No object was returned from [\_SB_.FAKE._CRS] (Node
c21e62fc), AE_NOT_EXIST
ACPI Exception (pci_link-0278): AE_NOT_EXIST, Evaluating _CRS [20060707]
ACPI: PCI Interrupt Link [FAKE] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [INA0] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA1] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA2] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA3] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA4] (IRQs 15) *5
ACPI: PCI Interrupt Link [INA5] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA6] (IRQs 15) *10
ACPI: PCI Interrupt Link [INA7] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INT4] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INT5] (IRQs *15)
ACPI: PCI Interrupt Link [INT6] (IRQs 15) *11
ACPI: PCI Interrupt Link [INT7] (IRQs 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Device 0000:00:00.0 not found by BIOS
PCI: Device 0000:00:00.1 not found by BIOS
PCI: Device 0000:00:0f.0 not found by BIOS
PCI: Device 0000:00:11.0 not found by BIOS
PCI: Device 0000:00:11.1 not found by BIOS
pnp: 00:01: ioport range 0xf50-0xf58 has been reserved
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0xc06-0xc08 has been reserved
pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
pnp: 00:01: ioport range 0xc49-0xc4a has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1167804042.804:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Thermal Zone [THM0] (8 C)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
SCSI subsystem initialized
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
HP CISS Driver (v 3.6.10)
hda: COMPAQ SC-140S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 22 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 25 (level, low) -> IRQ 177
sym0: <896> rev 0x7 at pci 0000:05:04.0 irq 169
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
cciss0: <0xb060> at PCI 0000:02:05.0 IRQ 177 using DAC
blocks= 177814560 block_size= 512
heads= 255, sectors= 32, cylinders= 0
blocks= 177814560 block_size= 512
heads= 255, sectors= 32, cylinders= 0
cciss/c0d0: p1 p2 p3
ACPI: PCI Interrupt 0000:05:04.1[B] -> GSI 21 (level, low) -> IRQ 185
sym1: <896> rev 0x7 at pci 0000:05:04.1 irq 185
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 27 (level, low) -> IRQ 193
e100: eth0: e100_probe: addr 0xf7ff7000, irq 193, MAC addr 00:50:8B:BB:43:BD
hda: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: SMB base address uninitialized - upgrade BIOS or use
force_addr=0xaddr
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:00.1 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:11.0 failed with error -22
agpgart: unable to determine aperture size.
agpgart: agp_backend_initialize() failed.
agpgart-serverworks: probe of 0000:00:11.1 failed with error -22
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
Adding 3903784k swap on /dev/cciss/c0d0p3. Priority:-1 extents:1
across:3903784k
EXT3 FS on cciss/c0d0p2, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ACPI: Power Button (FF) [PWRF]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
------------------------------------
The Juneau Linux Users Group -- http://www.juneau-lug.org
This is the Juneau-LUG mailing list.
To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the
word unsubscribe in the subject header.
Other related posts: