[juneau-lug] Re: Equipment for swapping
- From: Toby Harbanuk <tobysam@xxxxxx>
- To: juneau-lug@xxxxxxxxxxxxx
- Date: Thu, 14 Nov 2002 21:51:13 -0900
My swap stuff
bag of misc pc66 and 100 ram. chips between 16mb and 128mb
2x PII/233 dell optiplexes, desktrop formfactor. no ram, no hardrives
to my knowledge.
20x 3com 10/100 nics. 3c905 chipset.
several old 4mb video cards. ati.
motorola mac clone with chirp architecture and open firmware. 200mhz
603ev, 32mb edo ram, atx formfactor. internal ide and scsi connectors.
powermac 7600. 132mhz ppc 604. 64mb ram, 6gb scsi hardrive. stock
analogue video capture card, and g3 300 upgrade card. not sure if g3
card works.
15inch gateway vga monitor.
2x 24port rackable stackable 3com 10/100 hubs. I have the back2back
cable.
2x cisco 2501 routers. iosv12.1 enterprise, no ipsec. 16ram/16flash.
two sync serial, one aaui. console kit included.
8x2 minicom kvm switch with some cable. ps2 + vga. not sure if it still
works. it's been sitting in my car for a month.
compact HP laserjet 5L printer. this thing is about the size of a
normal inkjet. parallel interface only. prints nicely, but smudges. I
think it needs a new cartridge. Should be postscript compatable.
several big boxes of other misc cables and connectors, drives, cards,
peropheral, etc.
I won't be bringing everything, but if there's something specific you
want to buy or trade for, let me know.
Toby
------------------------------------
This is the Juneau-LUG mailing list.
To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the
word unsubscribe in the subject header.
Other related posts:
