[jhb_airlines] Re: tips

  • From: "Bones" <bones@xxxxxxx>
  • To: <jhb_airlines@xxxxxxxxxxxxx>
  • Date: Mon, 9 Oct 2006 23:49:12 +0100

Yep - but what happens when you re-enable the second processor as suggested?

Whilst you are here can you give us a rundown on your current system now?

Graphics card
hard drive


-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Mr Winskill
Sent: 09 October 2006 22:29
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] Re: tips

I've had a quick look at the first, CPU related, suggestion.
In untouched state, with both processors ticked, CPU Useage is 54%, one
processor burbling just below max and the other burbling along just above
the baseline. FPS is about 57, at Ronaldsway.

With only one processor ticked, CPU Useage is down to 51%. One processor is
a straight line at max, the other barely discernible above baseline and fps
probably about 2 to 3 lower than in the first situation.

The Default was both running with FS9, which was producing marginally beter

Brighter brains than mine my deduce something from this.

Can't look at the effect of FSUIPC on blurries, since my version seems to
have become unregistered, at some stage.

Gerry Winskill

Franklyn Fisher <ff006c5886@xxxxxxxxxxxxxxxx> wrote :

> I don't know if this will be of any use to you, but have just found
> it. &gt; &gt; DualCore Processors
> &gt;
> &gt; Start FS in windowed mode.
> &gt; Press CTRL+ALT+DEL to get the task manager, click performance tab,
> &gt; observe that FS is only using one processor.
> &gt; The left graph will show a heavy load, the right a light load.
> &gt; Click on processes, and look for FS9.exe, and select Infinity. Remove

> &gt; the check mark from one processor.
> &gt; Close the window and then repeat the process, and select both
> &gt; again.
> &gt; FS9 will now spread the load over the 2 processors.
> &gt;
> &gt; Or search the Microsoft Support for Dual core hot fix.
> &gt;
> &gt;
> &gt; Blurries
> &gt;
> &gt; ie textures not loading fast enough
> &gt; Check your visibility settings in the registered version of FSUIPC.
> &gt;
> &gt; Hope this will be of help, or you already know this.
> &gt;
> &gt; Frank F

NOCC, http://nocc.sourceforge.net

Other related posts: