[jhb_airlines] Re: [jhb_airlines]Tonight's Session

  • From: "Paul Reynolds" <paul@xxxxxxxxxxxxxxxxxxx>
  • To: <jhb_airlines@xxxxxxxxxxxxx>
  • Date: Tue, 24 Oct 2006 15:43:48 +0100

Ring/e-mail the guy who set them up and confirm the username/password.
Explain you have the manual and are opening a port for multiplayer use.

PS Attaching the manual to separate e-mail off list to guarentee you have
it.

Paul.

-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Winskill
Sent: 24 October 2006 15:24
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] Re: [jhb_airlines]Tonight's Session


Another of life's little surprises. It doesn't accept the username and
password that I wrote down as having used. Always possible that the
techie who set it up correctly used a different combo. Any way of
getting to them?

Gerry Winskill


Paul Reynolds wrote:

>Gerry,
>
>To Create a New Inbound or Outbound Rule
>
>1 Submit the router's address in an Internet browser. (The default is
>192.168.0.1). 2 Enter the router's username and password.
>3 From the main menu, click Security > Rules.
>4 Click Add for inbound or outbound traffic, as appropriate to the
>application you are planning to run.
>5 Select the Service. The services the router knows about are listed in the
>drop down. If the service you want is not listed, add it as described in
the
>next section.
>6 Select the Action, for example ALLOW always.
>7 For Send to LAN Server, enter the IP address of the local server. Note
>that this is also the IP address the computers on your LAN will access.
>8 For WAN User choose Any, or limit access to particular IP addresses.
>9 For Log selection it is reasonable to turn logs on, especially at the
>beginning when you are unsure of the result of the changes you are making.
>Later, you may want to set logs to "Never" for performance reasons.
>10 Click Apply.
>
>Taken from the Netgear site
>http://kbserver.netgear.com/kb_web_files/N101145.asp#FR114PAnchor
>
>Paul
>
>-----Original Message-----
>From: jhb_airlines-bounce@xxxxxxxxxxxxx
>[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Winskill
>Sent: 23 October 2006 22:24
>To: jhb_airlines@xxxxxxxxxxxxx
>Subject: [jhb_airlines] Re: [jhb_airlines]Tonight's Session
>
>
>That was quick. Netgear DG834G.
>
>Gerry Winskill
>
>Paul Reynolds wrote:
>
>
>
>>Which Router do you have? I'll grab the manual off the net.
>>
>>Paul
>>
>>-----Original Message-----
>>From: jhb_airlines-bounce@xxxxxxxxxxxxx
>>[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Winskill
>>Sent: 23 October 2006 22:14
>>To: jhb_airlines@xxxxxxxxxxxxx
>>Subject: [jhb_airlines] Re: [jhb_airlines]Tonight's Session
>>
>>
>>Which leads me to the inevitable question; 'ow do I do that, sir?
>>
>>Grry Winskill
>>
>>Alex - Reheat.org wrote:
>>
>>
>>
>>
>>
>>>Aye that'll be it Gerry!
>>>
>>>Port 15000 needs to be forwarded and then it should all be fine!
>>>
>>>Alex
>>>
>>>Gerry Winskill wrote:
>>>
>>>
>>>
>>>
>>>
>>>>I thought I' got away with moving to a router, without the port
>>>>problems that others seem to have had. Could that be the cause of my
>>>>not hearing? All ideas gratefully received, 'cos I haven't a clue
>>>>how to get around this one!
>>>>
>>>>Gerry Winskill
>>>>
>>>>
>>>>Paul Reynolds wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Both John and I could hear you Gerry although you were
>>>>>over-modulating.
>>>>>
>>>>>Paul
>>>>>
>>>>>PS Still at Heathrow if you want to problem solve
>>>>>
>>>>>-----Original Message-----
>>>>>From: jhb_airlines-bounce@xxxxxxxxxxxxx
>>>>>[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry
>>>>>Winskill
>>>>>Sent: 23 October 2006 20:40
>>>>>To: jhb_airlines@xxxxxxxxxxxxx
>>>>>Subject: [jhb_airlines] Re: [jhb_airlines]Tonight's Session
>>>>>
>>>>>
>>>>>Well, that was a tiring session.
>>>>>Having got airborne, from EGNS, I discovered the EMB170's
>>>>>Autothrottle wasn't working. Lag between throttle movement and
>>>>>spooling up was a bit too lifelike, so speed control was hard work.
>>>>>
>>>>>That was for openers. Although I could connect to Heathrow Approach
>>>>>without difficulty, I didn't hear a thing throughout the evening.
>>>>>John reacted smartly to my squawking 7600 but I don't know whether
>>>>>he could hear my transmissions.
>>>>>
>>>>>Back to square one!
>>>>>
>>>>>Gerry Winskill
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>
>
>








Other related posts: