[jhb_airlines] Re: JHB FLY IN Tuesday16th December 2008

  • From: "Paul Reynolds" <paul@xxxxxxxxxxxxxxxxxxx>
  • To: <jhb_airlines@xxxxxxxxxxxxx>
  • Date: Wed, 10 Dec 2008 20:52:10 -0000

I'm not worried about being bugged, I've been with SWMBO for long enough o
have become hardened to that!

Paul


-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of F FISHER
Sent: 10 December 2008 20:39
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] Re: JHB FLY IN Tuesday16th December 2008

Paul

The trouble with turning off the UAC, is that it will keep bugging you that 
it is off!!!!!!!!

The problems that people have getting programs to run on one machine and 
access another is putting me off doing the same.

Frank F
----- Original Message ----- 
From: "Paul Reynolds" <paul@xxxxxxxxxxxxxxxxxxx>
To: <jhb_airlines@xxxxxxxxxxxxx>
Sent: Wednesday, December 10, 2008 8:07 PM
Subject: [jhb_airlines] Re: JHB FLY IN Tuesday16th December 2008


>I saw John H was staffing Birmingham Tower with additional Ground 
>controller
> present and Frank on at Leeds.  I also knew from The Eye Alistair and Mike
> were flying and Bones logged in too but try I could not get myself set up.
>
> I spent the whole evening trying to get my Teamspeak PTT functioning
> properly, it just didn't want to know on the Vista 64 machine.  After
> several frustrating hours I discovered there reports that User permissions
> under Vista may be blocking data transfers between programmes even if both
> programmes have full user privileges.  The solution is to turn off the 
> User
> Account Control function, something I discovered at something like 2:30am
> having spent hours trying to resolve what I thought must be a Comodo
> Internet Security issue!
>
> All that after having suitably buttered up SWMBO for an evening free!
>
> The sweetening process for next Tuesday is already underway...
>
> Paul
>
> -----Original Message-----
> From: jhb_airlines-bounce@xxxxxxxxxxxxx
> [mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of F FISHER
> Sent: 10 December 2008 19:16
> To: jhb_airlines@xxxxxxxxxxxxx
> Subject: [jhb_airlines] Re: JHB FLY IN Tuesday16th December 2008
>
> Mike
>
> According to my onscreen info,you disappeared around mid Wales, and 
> remained
>
> offscreen for at least 10 minutes, so I assumed you had another of your
> glitches.
>
> I was going to log off just before 21:00, but after sitting in the chair 
> for
>
> nearly 2 hours without a contact, I just got plain bored, and left early.
>
> Sorry
>
> Alistair was the only other JHB'er and he completed his trip to Exeter.
>
> Frank F
> ----- Original Message ----- 
> From: "Mike Lucas" <mhlucas@xxxxxxxxxxxx>
> To: <jhb_airlines@xxxxxxxxxxxxx>
> Sent: Wednesday, December 10, 2008 4:57 PM
> Subject: [jhb_airlines] Re: JHB FLY IN Tuesday16th December 2008
>
>
>> Frank
>>
>> I think you must have given up a bit before 21.00.  I was vectored into
>> EGNM by Centre because it was no longer manned when I was at POL, and my
>>  blocks time at EGNM was 20.57.  Judging by the voice traffic on
>> Centre, it was fairly busy last night, but this is not borne out by
>> reports from you and Bones (I was the only movement at EGNS).  There
>> were some server glitches - I was dropped twice during my flight from
>> EGTE to EGNM - so maybe this put some folks off.
>> Mike L
>>
>> F FISHER wrote:
>>> Fred
>>>
>>> I gave up at 21:00, airways dead as a Dodo. Anyway, will be around next
>>> Tuesday, might even plug in tonite for a couple of hours.
>>
>
>
>
----------------------------------------------------------------------------
> ----
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.9.16/1841 - Release Date: 
> 10/12/2008
> 09:30
>
>
>


----------------------------------------------------------------------------
----



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.16/1841 - Release Date: 10/12/2008 
09:30



Other related posts: