[jhb_airlines] Re: FS9 Menu Problem

  • From: gwinsk@xxxxxxx
  • To: jhb_airlines@xxxxxxxxxxxxx
  • Date: Wed, 29 Sep 2004 12:59:28 +0100

Tom,
Tried that, before I disabled manually.

Gerry Winskill
gwinsk@xxxxxxx




On 29 Sep 2004 at 12:56, tom smith wrote:

> HI GERRY
> Part of the install has a box and if you tick it the install plays
> around with the surrounding Europe to adjust the levels or some thing
> like that Tom ----- Original Message ----- From: <gwinsk@xxxxxxx> To:
> <jhb_airlines@xxxxxxxxxxxxx> Sent: Wednesday, September 29, 2004 12:49
> PM Subject: [jhb_airlines] Re: FS9 Menu Problem
> 
> 
> > FSNav DBC already had NL2000 deleted; no reference to it.
> > So, with no NL2000 scenery in my Addon Scenery folder. All
> > references
> expunged from
> > the many scenery.cfg variants, etc, how is it still picking up a
> > reference
> to "the
> > Netherlands" ? There must be another source of data, invaded when
> > NL2000
> was
> > installed, which holds a list of sceneries.
> > One other worrying fact I discovered is that two of the bottom of
> > the list
> sceneries had
> > been disabled; VFR EUROPE WEST and Eastern EUROPE.. Since I haven't
> disabled
> > them, it must, again, be down to one of the Autoinstal progs.
> >
> > Gerry Winskill
> > gwinsk@xxxxxxx
> >
> >
> >
> >
> > On 29 Sep 2004 at 11:31, Bones wrote:
> >
> > > If you have the same Netherlands scenery as I have it is all
> > > controlled through its own unique Feature Panel. Mine is at
> > > H:\FS2002_Scenery\Europe\Netherlands\nl2000_V2_9\feature_panel\Fea
> > > ture pan= el. exe.
> > >
> > > This is a powerful little tool and it has some serious tweaking =
> > > abilities. To be honest it is the sort of thing I'd like to see
> > > available for full = FS control and not just the Netherlands
> > > scenery. Having said that I can't = see anything obvious in this
> > > tool that should affect the listing of your = areas in the
> > > scenery.cfg file. In my FS2002 scenery.cfg file the entry is =
> > > quite normal :
> > >
> > > [Area.151]
> > > Title=3DThe Netherlands 2000 V2.9
> > > Active=3DFALSE
> > > Layer=3D151
> > > Local=3Dh:\FS2002_Scenery\Europe\Netherlands\nl2000_V2_9
> > > Flatten.0=3D0,N53 44,E03 13,N53 44,E07 28,N51 20,E07 28,N51 20,E03
> > > 13 Flatten.1=3D114,N51 20,E05 30,N51 20,E06 10,N51 03,E06 10,N51
> > > 03,E05 30 Flatten.2=3D375,N51 03,E05 30,N51 03,E06 10,N50 40,E06
> > > 10,N50 40,E05 30 Remote=3D Required=3DFALSE
> > >
> > > As to FS2004 I can't see an entry for this scenery in its
> > > scenery.cfg = file and can only guess this is an error on my part.
> > > I've had a quick look through the 7Mb manual and it should be
> > > there so I'll activate it and = check it out next time I run
> > > FS2004. Incidentally the said manual is worth = keeping in a
> > > separate folder as it has some of the most glorious VFR charts and
> > > airfield layout charts I have ever seen.
> > >
> > > Another odd thing I have just spotted - there are quite a few
> > > sceneries = in my collection that aren't in the FS2004 scenery.cfg
> > > list. Dinard, Naples photoreal, Luxembourg and Midway amongst
> > > others. I'm beginning to wonder = if my usual habit of adding
> > > scenery areas with FSNavDBC isn't working = properly. This may be
> > > possible as FS2004 is a bit weird with its multiple cfg = files
> > > for scenery. I'll check it out.
> > >
> > > bones
> > >
> > > > -----Original Message-----
> > > > From: jhb_airlines-bounce@xxxxxxxxxxxxx
> > > > [mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of
> > > > gwinsk@xxxxxxx Sent: 29 September 2004 08:11 To:
> > > > ukscenery@xxxxxxxxxx Cc: jhb_airlines@xxxxxxxxxxxxx Subject:
> > > > [jhb_airlines] FS9 Menu Problem
> > > >=20
> > > >=20
> > > > Looking further for reasons why the World Goto Airports menu
> > > > won't display Default=20 United Kingdom airfields is
> > > > informative, if not helpful. The=20 problem isn't confined to
> > > > the=20 UK. It applies to anything below the entry for   The=20
> > > > Netherlands. Go up one, to Thailand,=20 and it worls. Got to
> > > > Timor, or anything lower, and Zilch.=20 Even the normally
> > > > dominant=20 United States doesn't work. The entry for The
> > > > Netherlands produces only an offering of 3=20 Cities, though
> > > > four display:=20 Heligoland, Rigg 1, Rigg 2, Rigg 3.
> > > >  Meanwhile, there was no reference to NL2000 in the Addon=20
> > > > Scenery Goto option.
> > > >=20
> > > > The NL 2000 Manual says the Instal option offers an Uninstal
> > > > pick. Not on mine it=20 doesn't. I've followed the steps laid
> > > > down for a manual=20 uninstal. Menu problem persists,=20 with
> > > > same options for The Netherlands.
> > > >=20
> > > >  The Control Panel didn't display the programme as present,
> > > > before I uninstalled it but=20
> > > > it's effects seem to linger on. Presumably it's left other=20
> > > > referrences in the system. Off to=20 do a RegClean. Anyone any
> > > > ideas where FS keeps details of the sceneries it looks for?
> > > >=20
> > > > Gerry Winskill
> > > >=20
> > > > gwinsk@xxxxxxx
> > > >=20
> > > >=20
> > > >=20
> > >
> > >
> >
> >
> >
> 
> 



Other related posts: