[jhb_airlines] Re: B350

  • From: "F FISHER" <ffisher991@xxxxxxxxxxxxxx>
  • To: <jhb_airlines@xxxxxxxxxxxxx>
  • Date: Wed, 20 Aug 2008 17:12:01 +0100

They are on my wish list, but Santa has given a big no-no for this now and in the future, my pockets are not that deep.


Frank F
----- Original Message ----- From: "Bones" <bones@xxxxxxx>
To: <jhb_airlines@xxxxxxxxxxxxx>
Sent: Wednesday, August 20, 2008 4:59 PM
Subject: [jhb_airlines] Re: B350


Looks like you are at a disadvantage here. The Go Flight throttle unit has
its own setup utility and I can switch from piston to turboprop to jet
assignments with a single click. Not only that but it provides options for
1, 2, 3 or four engine operation.

bones
bones@xxxxxxx
http://woodair.net


-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of F FISHER
Sent: 20 August 2008 15:13
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] Re: B350

Bones

There should be a key combination for putting the condition levers to low
idle, could do it from there, running in low idle against high idle should
then cut my fuel comsumption.

Other than that, multiple FS installs to cover each type, no problem with
FS9,I have the space, but FSX!

Methinks a dig through the assignments table later.

Frank F
----- Original Message ----- From: "Bones" <bones@xxxxxxx>
To: <jhb_airlines@xxxxxxxxxxxxx>
Sent: Wednesday, August 20, 2008 2:57 PM
Subject: [jhb_airlines] Re: B350


Indeed. You really need separate lever assignments for pistons, turboprops
and jets.

bones
bones@xxxxxxx
http://woodair.net


-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of F FISHER
Sent: 20 August 2008 09:29
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] B350

Bones

Yes I kept the descent rate down to 250 or less, started at FL250 over IOM
and at FL100 before BLACA.

This morning, a proverbiale light went on.

My Saitek mixture levers alter the sim condition levers, no problem.

But those levers are assigned to the mixture keys in the sim. Not the
condition levers.

Which would explain why moving them has no effect on high/low idle.

Will have to have a dig into the assignments again, but it would mean have

2

sets of assignments for piston and turbos.

Frank F




No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.6/1621 - Release Date: 19/08/2008

18:53







No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.6/1623 - Release Date: 20/08/2008 08:12





Other related posts: