[jhb_airlines] Re: ATOC/FPI problem Voice

  • From: "Bones" <bones@xxxxxxx>
  • To: <jhb_airlines@xxxxxxxxxxxxx>
  • Date: Sat, 31 Dec 2005 15:15:40 -0000

I tried this but it didn't work. I ran the setup and selected eu1 and eu2
servers for successive sessions but after double clicking an ATC position I
noticed the channel had gone back to eu.voice and required manual changing.

I also hit a problem that Mike mentioned in that the channel box wouldn't
accept the additional characters. This can be fixed if you use lower case.
With upper case the text swamps the box and limits what can be typed in.

bones

-----Original Message-----
From: jhb_airlines-bounce@xxxxxxxxxxxxx
[mailto:jhb_airlines-bounce@xxxxxxxxxxxxx] On Behalf Of Kev Townsend
Sent: 31 December 2005 02:40
To: jhb_airlines@xxxxxxxxxxxxx
Subject: [jhb_airlines] Re: ATOC/FPI problem Voice


Rainer has posted a note in the Forum regarding voice channels which reads:

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[

to achieve a correct connection of pilots use the voice servers as follows:

eu-1.voice.fpi-net.net

or

eu-2.voice.fpi-net.net

or

us-1.voice.fpi-net.net

or

us-2.voice.fpi-net.net

Using the adress eu.voice.fpi-net.net or us.voice.fpi-net.net will NOT
result in a correct voice connection.

The according software update is under developement. _________________
Rainer Raach

This is posted in the ATC pages, however I guess it is for both!

Kev T




Other related posts: